제조사부품번호

Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP

RS 제품 번호:: 178-3172
제조사 부품 번호:: ACPL-790B-000E
제조업체:: Broadcom

Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tube of 50 units)*

₩435,220.00

재고있음

550 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tube*
50 - 50	₩8,704.40	₩435,257.60
100 - 150	₩8,516.40	₩425,801.20
200 +	₩8,326.52	₩416,344.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 178-3172
제조사 부품 번호:: ACPL-790B-000E
제조업체:: Broadcom

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Broadcom
	Product Type	Isolation Amplifier
	Minimum Supply Voltage	3V
	Maximum Supply Voltage	5.5V
	Number of Channels	1
	Mount Type	Through Hole
	Package Type	PDIP
	Pin Count	8
	CMRR - Common Mode Rejection Ratio	76dB
	Minimum Operating Temperature	105°C
	Vos - Input Offset Voltage	2 mV
	Maximum Operating Temperature	-40°C
	Standards/Approvals	No
	Height	3.56mm
	Length	9.8mm
	Width	6.35 mm
	Series	ACPL-790B
	Automotive Standard	No

	모두 선택
	브랜드 Broadcom
	Product Type Isolation Amplifier
	Minimum Supply Voltage 3V
	Maximum Supply Voltage 5.5V
	Number of Channels 1
	Mount Type Through Hole
	Package Type PDIP
	Pin Count 8
	CMRR - Common Mode Rejection Ratio 76dB
	Minimum Operating Temperature 105°C
	Vos - Input Offset Voltage 2 mV
	Maximum Operating Temperature -40°C
	Standards/Approvals No
	Height 3.56mm
	Length 9.8mm
	Width 6.35 mm
	Series ACPL-790B
	Automotive Standard No

Datasheet

Isolating Amplifiers, Avago Technologies

The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.

Various types available including:

precision isolation amplifiers

miniature isolation amplifiers

precision optically isolated voltage sensors

isolated linear sensing ICs

isolation amplifiers with short circuit and overload detection

automotive isolation amplifiers

Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP

Isolating Amplifiers, Avago Technologies

관련된 링크들