제조사부품번호

Fluke 1535 Insulation Resistance Tester, 250 V Min, 2500 V Max, 500 GΩ CAT IV

RS 제품 번호:: 283-7401
Distrelec 제품 번호:: 304-20-196
제조사 부품 번호:: FLUKE-1535
제조업체:: Fluke

Fluke 1535 Insulation Resistance Tester, 250 V Min, 2500 V Max, 500 GΩ CAT IV

Subtotal (1 unit)*

₩2,686,261.50

5 개 단위 배송 준비 완료
추가로 2026년 6월 18일 부터 3 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩2,686,261.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 283-7401
Distrelec 제품 번호:: 304-20-196
제조사 부품 번호:: FLUKE-1535
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Product Type	Insulation Tester
	Model Number	1535
	Tester Type	Insulation Resistance Tester
	Minimum Test Voltage	250V
	Maximum Test Voltage	2500V
	Display Type	LCD
	Test Current	5mA
	Power Source	Battery
	Battery Type	AA Alkaline
	Minimum Operating Temperature	-10°C
	Insulation Testing Resistance	500GΩ
	Safety Category Voltage	600V
	Maximum Operating Temperature	50°C
	Safety Category Level	CAT IV
	Length	93mm
	Standards/Approvals	Pollution Degree 2 IEC 615571, IEC 610101
	Height	184mm
	Width	211mm
	Weight	1.3kg

	모두 선택
	브랜드 Fluke
	Product Type Insulation Tester
	Model Number 1535
	Tester Type Insulation Resistance Tester
	Minimum Test Voltage 250V
	Maximum Test Voltage 2500V
	Display Type LCD
	Test Current 5mA
	Power Source Battery
	Battery Type AA Alkaline
	Minimum Operating Temperature -10°C
	Insulation Testing Resistance 500GΩ
	Safety Category Voltage 600V
	Maximum Operating Temperature 50°C
	Safety Category Level CAT IV
	Length 93mm
	Standards/Approvals Pollution Degree 2 IEC 615571, IEC 610101
	Height 184mm
	Width 211mm
	Weight 1.3kg

Datasheet - FLUKE-1535

COO (Country of Origin):: CN

Fluke Insulation Tester, 500GΩ Insulation Testing Resistance, 2500V Maximum Test Voltage - FLUKE-1535

This insulation tester is a portable handheld diagnostic instrument designed for field and workshop insulation resistance assessment across industrial and renewable-energy settings. It delivers selectable test voltages from 250V to 2500V and measures very high resistance values to assist technicians in verifying insulation integrity and locating degradation on electrical assets.

Features & Benefits

• Selectable voltages 250–2500V for tailored testing ranges
• Insulation measurement capability up to 500GΩ for high‑resistance detection
• Short‑circuit current up to 5mA for faster, stable readings
• CAT IV 600V safety rating for use near incoming supply points
• AA battery operation enabling long field use without mains power
• LCD display for clear visualisation of measured values

Applications

• Suitable for insulation testing of motors and generators on site
• Ideal for commissioning and maintenance of solar installations
• Used for preventive maintenance in industrial electrical systems
• Can be used for troubleshooting insulation faults on factory equipment

How many measurements can I expect between battery changes?

Using AA alkaline cells, the unit can perform over 1,300 tests at the highest test voltage on a single set of batteries.

Are there functions to assist insulation condition analysis?

Yes. It calculates Polarisation Index and Dielectric Absorption Ratio automatically to reduce environmental influence on results.

What additional measurements does the Advanced variant offer?

The Advanced instrument provides AC/DC voltage and resistance measurements Plus adjustable test voltage in 100V steps and ramp test mode.

How does the instrument manage charged capacitive circuits?

Charging and discharging behaviour is specified

typical charge rate for capacitive loads is 5s/μF and discharge rate is 1.5s/μF.