Infineon IKW40N120CS7XKSA1, N-Channel IGBT, 40 A 1200 V, 3-Pin TO-247, Through Hole

RS 제품 번호:: 232-6729
제조사 부품 번호:: IKW40N120CS7XKSA1
제조업체:: Infineon

Infineon IKW40N120CS7XKSA1, N-Channel IGBT, 40 A 1200 V, 3-Pin TO-247, Through Hole

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (30 units, in tubes of 30)*

₩207,240.00

일시적 품절

2027년 1월 14일 부터 210 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tube*
30 - 30	₩6,908.00	₩207,240.00
60 - 60	₩6,562.00	₩196,878.00
90 +	₩6,234.00	₩187,020.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 232-6729
제조사 부품 번호:: IKW40N120CS7XKSA1
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	IGBT
	Maximum Continuous Collector Current Ic	40A
	Maximum Collector Emitter Voltage Vceo	1200V
	Number of Transistors	1
	Package Type	TO-247
	Mount Type	Through Hole
	Channel Type	N
	Pin Count	3
	Maximum Collector Emitter Saturation Voltage VceSAT	2V
	Maximum Gate Emitter Voltage VGEO	±20 V (Transient gate-emitter Voltage: ±25 V)
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	175°C
	Series	IKW40N120CS7
	Width	16.3mm
	Standards/Approvals	JEDEC47/20/22
	Length	21.5mm
	Height	5.3mm
	Automotive Standard	No

	모두 선택
	브랜드 Infineon
	Product Type IGBT
	Maximum Continuous Collector Current Ic 40A
	Maximum Collector Emitter Voltage Vceo 1200V
	Number of Transistors 1
	Package Type TO-247
	Mount Type Through Hole
	Channel Type N
	Pin Count 3
	Maximum Collector Emitter Saturation Voltage VceSAT 2V
	Maximum Gate Emitter Voltage VGEO ±20 V (Transient gate-emitter Voltage: ±25 V)
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 175°C
	Series IKW40N120CS7
	Width 16.3mm
	Standards/Approvals JEDEC47/20/22
	Length 21.5mm
	Height 5.3mm
	Automotive Standard No

Datasheet - IKW40N120CS7XKSA1

Infineon IKW40N120CS7 Series IGBT, 1200V Collector-Emitter Voltage, 40A Collector Current - IKW40N120CS7XKSA1

This IGBT is a high-voltage semiconductor switch designed for use in power conversion and switching applications where robust collector-emitter blocking and gate control are required. It is a through-hole device in a TO-247 package intended for discrete mounting and thermal interfacing, suitable for industrial temperature ranges and JEDEC mechanical standards.

Features and Benefits:

• 1200 V collector-emitter rating for high-voltage switching capability
• 40 A continuous collector current for sustained load handling
• ±20 V gate-emitter limit allows tolerant gate-drive ranges
• 2 V maximum Vce(sat) reduces conduction losses under load
• N-channel device behaviour supports conventional gate-drive topologies
• JEDEC47/20/22 mechanical compliance aids assembly consistency

Applications

• Suitable for high-voltage inverter stages in industrial converters
• Used for motor drive power stages requiring 40 A handling
• Ideal for switch-mode power supplies with large voltage stress
• Can be used for medium-power induction heating systems
• Suitable for design prototypes using through-hole mounting

What transient gate protection is indicated for gate excursions?

The gate-emitter rating permits transients up to ±25 V while the continuous limit is ±20 V, so transient suppression or snubbing is recommended.

What operating temperatures can be expected for deployed units?

The device is rated to operate from -40 °C up to 175 °C, enabling use across wide industrial temperature ranges.

How should thermal management be approached for sustained high current?

Use a suitable heatsink and thermal Interface to dissipate heat from the TO-247 package when conducting 40 A continuously to maintain junction temperatures within limits.

What pin configuration does the package present for PCB layout?

The through-hole TO-247 format provides three pins for electrical connection and a mounting tab for heat-sinking and mechanical support.

Are there constraints on channel type for circuit design?

The N-channel characteristic defines gate-drive polarity and switching arrangement and should be matched to driver circuits that provide an appropriate gate voltage range.