제조사부품번호

SMC Polyurethane, Hose Pipe, 5 mm ID, 8 mm OD, Clear, 20 m

RS 제품 번호:: 366-602
제조사 부품 번호:: TU0805C-20-X214
제조업체:: SMC

SMC Polyurethane, Hose Pipe, 5 mm ID, 8 mm OD, Clear, 20 m

모든 Hose Pipe & Flexible Tubes 열람하기

Subtotal (1 unit)*

₩69,680.00

제한된 재고

추가로 2026년 11월 09일 부터 3 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩69,680.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 366-602
제조사 부품 번호:: TU0805C-20-X214
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Product Type	Hose Pipe
	Inside Diameter	5mm
	Outside Diameter	8mm
	Material	Polyurethane
	Series	TU Series
	Maximum Operating Pressure	0.8 Mpa
	Application	General Pneumatic Tubing
	Maximum Operating Temperature	60°C
	Minimum Operating Temperature	-20°C
	Colour	Clear
	Standards/Approvals	RoHS Certificate of Compliance
	Length	20m
	Reinforced	Yes
	Bend Radius	15mm

	모두 선택
	브랜드 SMC
	Product Type Hose Pipe
	Inside Diameter 5mm
	Outside Diameter 8mm
	Material Polyurethane
	Series TU Series
	Maximum Operating Pressure 0.8 Mpa
	Application General Pneumatic Tubing
	Maximum Operating Temperature 60°C
	Minimum Operating Temperature -20°C
	Colour Clear
	Standards/Approvals RoHS Certificate of Compliance
	Length 20m
	Reinforced Yes
	Bend Radius 15mm

Datasheet - TU0805C-20-X214

COO (Country of Origin):: JP

SMC Series TU Hose Pipe, 20m Length, 0.8 Mpa Maximum Operating Pressure - TU0805C-20-X214

This hosepipe is a clear polyurethane tube designed for general pneumatic use, supplying compressed air within industrial and workshop systems. It offers flexibility across a broad temperature range and is supplied in a 20m roll for straightforward installation and routing in compressed-air networks.

Features and Benefits:

• Reinforced construction improves kink resistance and longevity
• Withstands up to 0.8 MPa to support moderate-pressure pneumatic systems
• Operational from -20°C to 60°C for varied environmental conditions
• 15mm bend radius allows tight routing in confined spaces
• RoHS‑certified materials reduce risk of restricted substance presence

Applications

• Suitable for pneumatic tool feed lines in workshops
• Ideal for automated assembly air-supply runs
• Used with air-preparation units and valves in factory installations
• Can be used for laboratory compressed-air distribution
• Suitable for temporary site air feed and equipment testing

How does the material affect flexibility and handling?

The polyurethane construction provides a balance of elasticity and dimensional stability, enabling repeated flexing without rapid fatigue under normal pneumatic cycling.

What length options are provided and how does that affect installation?

It is supplied as a continuous 20m roll, simplifying runs that require long, uninterrupted lengths and reducing the number of joints and fittings needed.

How does the tubing perform where space is constrained?

The small cross-section and a 15mm minimum bend radius permit tight bends close to manifolds and fittings while maintaining flow integrity.

Is this suitable for higher-temperature or cryogenic applications?

The usable temperature window is limited to -20°C up to 60°C, so it should not be used where sustained temperatures fall outside this range.