Alpha Wire Hookup Wire TEFLON Series Orange PTFE Equipment Wire, 18 AWG, 19, 30 m, Polytetrafluoroethylene, 5857 OR005

RS 제품 번호:: 177-1359
제조사 부품 번호:: 5857 OR005
제조업체:: Alpha Wire

Alpha Wire Hookup Wire TEFLON Series Orange PTFE Equipment Wire, 18 AWG, 19, 30 m, Polytetrafluoroethylene, 5857 OR005

대량 구매 할인 기용 가능

Subtotal (1 reel of 30 metres)*

₩474,786.00

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

릴당	릴당	미터당*
1 - 49	₩474,786.00	₩15,826.20
50 +	₩460,570.50	₩15,352.35

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 177-1359
제조사 부품 번호:: 5857 OR005
제조업체:: Alpha Wire

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Alpha Wire
	Product Type	PTFE Equipment Wire
	Jacket Colour	Orange
	American Wire Gauge	18AWG
	Core Strands	19
	Cable Length	30m
	Voltage	600V
	Outside Diameter	0.069in
	Maximum Operating Temperature	200°C
	Conductor Material	Silver Plated Copper
	Cable Type	Hookup
	Jacket Material	Polytetrafluoroethylene
	Minimum Operating Temperature	-60°C
	Standards/Approvals	MIL-W-16878/4, NEMA HP-EXBBB, UL1213, VW-1
	Sub Type	Type E
	Fire Behaviour	Flame Retardant
	Series	Hookup Wire TEFLON

	모두 선택
	브랜드 Alpha Wire
	Product Type PTFE Equipment Wire
	Jacket Colour Orange
	American Wire Gauge 18AWG
	Core Strands 19
	Cable Length 30m
	Voltage 600V
	Outside Diameter 0.069in
	Maximum Operating Temperature 200°C
	Conductor Material Silver Plated Copper
	Cable Type Hookup
	Jacket Material Polytetrafluoroethylene
	Minimum Operating Temperature -60°C
	Standards/Approvals MIL-W-16878/4, NEMA HP-EXBBB, UL1213, VW-1
	Sub Type Type E
	Fire Behaviour Flame Retardant
	Series Hookup Wire TEFLON

Belden Hookup Wire TEFLON Series PTFE Equipment Wire, 0.96mm² Cross Sectional Area, Orange Jacket - 5857 OR005

This PTFE equipment wire is a high-temperature, single-core hookup cable designed for demanding electrical and electronic installations where thermal endurance and Compact conductor size are required. It features a silver-plated copper conductor with PTFE insulation, offering reliable performance in confined assemblies and elevated-temperature environments up to 200°C while maintaining a 600Vrms voltage rating suitable for control, signal and power wiring in industrial systems.

Features & Benefits

• Silver-plated copper conductor reduces contact resistance and oxidation
• PTFE insulation endures continuous operation at 200°C maximum
• VW-1 flame-test rating enhances circuit-board and panel safety
• 0.96mm² cross-sectional area supports moderate current carrying
• 19-strand conductor construction improves flexibility and routing

Applications

• Suitable for automation control wiring in high-temperature enclosures
• Ideal for internal wiring in industrial electronic assemblies
• Used for wiring in electrical panels subject to elevated heat
• Can be used for interconnects in mechanical systems with tight bend requirements
• Suitable for military-spec cabling requiring Type E compliance

What is the conductor construction and how does it affect handling?

The conductor comprises 19 strands of silver-plated copper, which gives the cable greater flexibility for routing through confined spaces while maintaining good conductivity.

Which temperature extremes can this cable withstand during operation?

The cable operates reliably between -60°C and 200°C, allowing use in both cold storage and high-temperature process environments.

How does the product comply with environmental substance regulations?

Materials conform to RoHS and REACH criteria, with no listed SVHCs above 0.1% by mass, and meet China SJ/T 11364-2006 marking requirements.

What electrical characteristics support system design calculations?

Voltage rating is 600Vrms and conductor DCR is approximately 5.6Ω/1000 ft at 20°C, with nominal inductance around 0.03μH/ft.

What physical handling limits should be observed during installation?

Recommended minimum bend radius is 10 times the cable diameter and maximum pull tension is 14.9 lb to avoid conductor or insulation damage.

Standards

MIL-DTL-16878/4 (Type E) (600 V), UL AWM 1213, NEMA HP3