Starrett 16 mm Diameter Carbide Tip Drill Bit for Copper, Cast Iron, Mild and Stainless Steel, Aluminium
- RS 제품 번호:
- 198-5111
- 제조사 부품 번호:
- CTD16
- 제조업체:
- Starrett
Subtotal (1 unit)*
₩49,660.00
재고있음
- 140 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩49,660.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 198-5111
- 제조사 부품 번호:
- CTD16
- 제조업체:
- Starrett
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Starrett | |
| Product Type | Drill Bit | |
| Diameter | 16mm | |
| Arbor Included | Yes | |
| Material | Carbide Tip | |
| Material Cut | Copper, Cast Iron, Mild and Stainless Steel, Aluminium | |
| Cut Depth | 1in | |
| Number of Pieces | 1 | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Starrett | ||
Product Type Drill Bit | ||
Diameter 16mm | ||
Arbor Included Yes | ||
Material Carbide Tip | ||
Material Cut Copper, Cast Iron, Mild and Stainless Steel, Aluminium | ||
Cut Depth 1in | ||
Number of Pieces 1 | ||
Standards/Approvals No | ||
The Starrett carbide tipped deep cut hole saw is a perfect solution for repeated intense drilling in mild and stainless steel, cast iron, aluminium and copper of all thicknesses up to 25mm (1inch). Featuring three different angles ground on to the cutting face of each tooth on the saw. This 3-Ply tooth grind delivers a fast cut, minimal snag when the saw begins the cut, efficient swarf removal minimising heat build up and maximum saw life.
3-Ply tooth grind on each tooth delivers maximum performance.
Supplied as one piece with no need for assembly
Ejector spring to aid ejection of the core from the saw.
관련된 링크들
- Starrett 32 mm Diameter Carbide Tip Drill Bit for Aluminium, Mild Steel, Stainless Steel, Cast Iron, Copper
- Starrett 40 mm Diameter Carbide Tip Drill Bit for Fibreglass, Galvanised Iron
- Starrett 51 mm Diameter Carbide Tip Drill Bit for Galvanised Iron, Fibreglass
- Starrett 25 mm Diameter Carbide Tip Drill Bit for Galvanised Iron, Fibreglass
- CK 16 mm Diameter Alloy Steel Hole Saw for Cast Iron, Copper, Mild and Stainless Steel
- Starrett 79 mm Diameter Tungsten Carbide Tipped Drill Bit
- Starrett 70 mm Diameter Tungsten Carbide Tipped Drill Bit
- Starrett 32 mm Diameter Tungsten Carbide Tipped Drill Bit