대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩16,055.20
제한된 재고
- 추가로 2026년 3월 09일 부터 184 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩16,055.20 |
| 5 + | ₩13,197.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 794-7830
- 제조사 부품 번호:
- 84TZA.6
- 제조업체:
- Facom
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Facom | |
| Unit of Measure | g | |
| Product Type | Hex Key | |
| Shape | T | |
| Hex Size | 6 mm | |
| Short or Long Arm | Long | |
| Overall Length | 240mm | |
| Non-Sparking | No | |
| End Type | Hex | |
| Height Safe | No | |
| Finish | Polished, Phosphate Coated | |
| Material | Silicon Steel | |
| Standards/Approvals | No | |
| Overall Width | 95mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Facom | ||
Unit of Measure g | ||
Product Type Hex Key | ||
Shape T | ||
Hex Size 6 mm | ||
Short or Long Arm Long | ||
Overall Length 240mm | ||
Non-Sparking No | ||
End Type Hex | ||
Height Safe No | ||
Finish Polished, Phosphate Coated | ||
Material Silicon Steel | ||
Standards/Approvals No | ||
Overall Width 95mm | ||
제외
- COO (Country of Origin):
- FR
Facom Standard T Handle Hex Key
Introducing Facoms T handle hex key. The ergonomic design of the handle allows for the tool to be multifunctional by allowing users to access both ends of the key. The T handle also offers a sturdy grip and comfort and designed for high torque speeds. These hexagon keys are used for the removal and tightening of fasteners and sockets.
This range includes the following sizes (Metric)
755-4125 - 2.5mm
794-7830 - 6mm
Features and Benefits:
Material - comprised of silicone steel, a hard-wearing material that ensures optimal strength and a long tool shelf life
Make use of both ends of the hex key
High quality, T shaped hex plus keys
The hex key features a phosphate coated finish
Metric
Typical Applications
Hex keys and bit sets are used by:
Plumbers
Electricians
Mechanics
Electronic Engineers
Did you know?
A Hex Key is commonly referred to as an Allen Key, this is because Allen was the original manufacturer of the Hex key.
Also, a hex key can be reconditioned using an electrical grinder, or similar type of equipment. Through removing the worn out part, the hex key has the capability of functioning like its brand new again – Although this type of maintenance should be minimal if the hex key is cared for and kept in a good condition.
Note
84TZ range have a straight standard end
84TZS range have a spherical end
84TZS range have a spherical end