사용할 수 없음
RS는 더 이상 이 제품을 입고하지 않습니다.
- RS 제품 번호:
- 755-4131
- 제조사 부품 번호:
- 84TZS.5
- 제조업체:
- Facom
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Facom | |
| Imperial or Metric | Metric | |
| Number of Pieces | 1 | |
| Hex Key Size | 5mm | |
| Shape | T | |
| Short or Long Arm | Long | |
| Material | Silicon Steel | |
| 모두 선택 | ||
|---|---|---|
브랜드 Facom | ||
Imperial or Metric Metric | ||
Number of Pieces 1 | ||
Hex Key Size 5mm | ||
Shape T | ||
Short or Long Arm Long | ||
Material Silicon Steel | ||
해당 안됨
- COO (Country of Origin):
- FR
Metric hexagon key with spherical head
Our hex key from Facom is made for high and low torque applications. The tool also has an ergonomic T handle and keys on both ends. These hexagon keys are used for the removal and tightening of fasteners and sockets.
This range includes the following sizes (metric):
769-1704 – 4mm
755-4131 – 5mm
769-1748 – 6mm
This range includes the following sizes (metric):
769-1704 – 4mm
755-4131 – 5mm
769-1748 – 6mm
Features and Benefits:
Metric hexagon key with spherical head
Ergonomic tee-handle allows effective use of either end of key
Sperical head gives a working angle of up to 30°
Short shank prvides extra torque for tightening
Polished phosphate finish
Silicon steel
Ergonomic tee-handle allows effective use of either end of key
Sperical head gives a working angle of up to 30°
Short shank prvides extra torque for tightening
Polished phosphate finish
Silicon steel
Typical Applications
Hex keys and bit sets are used by:
Plumbers
Electricians
Mechanics
Electronic Engineers
Plumbers
Electricians
Mechanics
Electronic Engineers
Did you know?
A Hex Key is commonly referred to as an Allen Key, this is because Allen was the original manufacturer of the Hex key.
Also, a hex key can be reconditioned using an electrical grinder, or a similar type of equipment. Through removing the worn out part, the hex key has the capability of functioning like its brand new again – Although this type of maintenance should be minimal if the hex key is cared for and kept in a good condition.
A Hex Key is commonly referred to as an Allen Key, this is because Allen was the original manufacturer of the Hex key.
Also, a hex key can be reconditioned using an electrical grinder, or a similar type of equipment. Through removing the worn out part, the hex key has the capability of functioning like its brand new again – Although this type of maintenance should be minimal if the hex key is cared for and kept in a good condition.
Note
84TZ range have a straight standard end
84TZS range have a spherical end
84TZS range have a spherical end