Transcend M.2 128 GB Internal SSD

N
모든 Hard Drives 열람하기

Subtotal (1 unit)*

₩393,627.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 5월 25일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩393,627.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
683-185
제조사 부품 번호:
TS128GMTE460TI-VS1
제조업체:
Transcend
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Transcend

Product Type

SSD

Sub Type

SSD

Memory Size

128GB

Internal/External

Internal

Form Factor

M.2

Industrial Grade

Yes

NAND Type

3D

Interface Type

PCI

Maximum Operating Temperature

85°C

Minimum Operating Temperature

-40°C

Standards/Approvals

UKCA

Width

22mm

Height

3.58mm

Length

42mm

COO (Country of Origin):
TW

Transcend SSD, 128GB Storage Capacity, M.2 Form Factor - TS128GMTE460TI-VS1


This M.2 NVMe SSD is an internal storage device designed for embedded and industrial applications where compact, high-temperature operation is required. It connects via a PCIe Gen3 x2 Interface to provide solid-state storage in a 42mm form factor suitable for space-constrained electronics. The drive employs 3D NAND memory and is available in a 128GB capacity, meeting UKCA standards for use in regulated environments.

Features and Benefits:


• NVMe PCIe Gen3 x2 Interface for low-latency data transfers
• 128GB capacity supporting embedded storage requirements
• Industrial-grade design enabling extended operational life
• Operates from −40 to 85°C for high-temperature deployments
• 3D NAND architecture delivering sustained flash performance

Applications


• Suitable for industrial control systems in automation
• Ideal for onboard storage in robotics and mechatronics
• Used for data logging in environmental monitoring units
• Can be used for gateway and edge computing modules
• Used with Compact single-board computers for embedded projects

What mechanical footprint should I plan for when integrating this drive?


The drive uses the M.2 2242 form factor with a 22mm width and 42mm length, which fits sockets designed for 2242 modules and requires a maximum height allowance of 3.58mm.

Which environments are appropriate given its operating temperature range?


It is suitable for installations exposed to extremes, operating continuously between −40°C and 85°C, making it appropriate for factory floors and outdoor enclosures without Active cooling.

How does the Interface choice affect system compatibility?


The NVMe PCIe Gen3 x2 signalling requires a motherboard or controller that supports PCIe lanes for M.2 NVMe devices

it will not operate in sockets limited to SATA M.2 signalling.

What regulatory marking does it carry for UK deployments?


The drive is compliant with UKCA marking requirements, indicating adherence to applicable UK product regulations.

Is this device intended for internal or external use?


The unit is specified for internal installation within equipment and enclosures rather than as an external, hot-pluggable device.

관련된 링크들