McLennan Servo Supplies Planetary Gearbox, 5:1 Gear Ratio, 12 Nm Maximum Torque
- RS 제품 번호:
- 363-6309
- 제조사 부품 번호:
- IP57-M1-5
- 제조업체:
- McLennan Servo Supplies
Subtotal (1 unit)*
₩403,711.20
재고있음
- 5 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩403,711.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 363-6309
- 제조사 부품 번호:
- IP57-M1-5
- 제조업체:
- McLennan Servo Supplies
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | McLennan Servo Supplies | |
| Gear Ratio | 5:1 | |
| Product Type | Gearbox | |
| Gearbox Type | Planetary | |
| Maximum Output Torque | 12Nm | |
| Diameter | 57 mm | |
| Shaft Diameter | 12.69mm | |
| Overall Length | 54mm | |
| Overall Width | 66.68mm | |
| Overall Depth | 66.68 mm | |
| Series | IP | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 McLennan Servo Supplies | ||
Gear Ratio 5:1 | ||
Product Type Gearbox | ||
Gearbox Type Planetary | ||
Maximum Output Torque 12Nm | ||
Diameter 57 mm | ||
Shaft Diameter 12.69mm | ||
Overall Length 54mm | ||
Overall Width 66.68mm | ||
Overall Depth 66.68 mm | ||
Series IP | ||
Standards/Approvals No | ||
Planetary Gearheads Series 57
Industrial type of gearhead for fixing to a wide range of motors
Planetary construction for high torque and compact dimensions
NEMA size 23 frame size
Reduced backlash
Supplied with two pinions
Fixing kits required for attachment to motors
Ideal for industrial, process or scientific applications which require high dynamics, accurate velocity or positional control
Fixing Kits
These kits are used to attach the Series 57 industrial planetary gearheads to a range of motors.
The kit consists of a fitting clamp, adaptor and fitting screws.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters
Note
De-rate ratio 10:1 (stock no. 363-6315) by 10%.
관련된 링크들
- McLennan Servo Supplies Planetary Gearbox, 100:1 Gear Ratio, 24 Nm Maximum Torque
- McLennan Servo Supplies Planetary Gearbox, 25:1 Gear Ratio, 24 Nm Maximum Torque
- McLennan Servo Supplies Planetary Gearbox, 10:1 Gear Ratio, 12 Nm Maximum Torque
- McLennan Servo Supplies Planetary Gearbox, 50:1 Gear Ratio, 24 Nm Maximum Torque, 5000rpm Maximum Speed
- McLennan Servo Supplies Spur Gearbox, 125:1 Gear Ratio, 5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 5:1 Gear Ratio, 700 Ncm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 25:1 Gear Ratio, 700 Ncm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 250:1 Gear Ratio, 6 Nm Maximum Torque