McLennan Servo Supplies Spur Gearbox, 250:1 Gear Ratio, 6 Nm Maximum Torque
- RS 재고 번호:
- 718-919
- 제조 부품 번호:
- MRIG27 (250:1)
- 제조업체:
- McLennan Servo Supplies
Subtotal (1 unit)*
₩391,792.00
재고있음
- 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
단위당 | 한팩당 |
|---|---|
| 1 + | ₩391,792.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 재고 번호:
- 718-919
- 제조 부품 번호:
- MRIG27 (250:1)
- 제조업체:
- McLennan Servo Supplies
사양
기술적 참조
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | McLennan Servo Supplies | |
| Product Type | Gearbox | |
| Gear Ratio | 250:1 | |
| Gearbox Type | Spur | |
| Maximum Output Torque | 6Nm | |
| Overall Width | 56mm | |
| Overall Depth | 41 mm | |
| Standards/Approvals | No | |
| Series | MRIG | |
| 모두 선택 | ||
|---|---|---|
브랜드 McLennan Servo Supplies | ||
Product Type Gearbox | ||
Gear Ratio 250:1 | ||
Gearbox Type Spur | ||
Maximum Output Torque 6Nm | ||
Overall Width 56mm | ||
Overall Depth 41 mm | ||
Standards/Approvals No | ||
Series MRIG | ||
Adaptable Gearboxes 4Nm
A range of high quality steel geared gearboxes with the following features:
Maximum output 4Nm
Metal throughout for high reliability and performance and dissipation of heat
Sintered bronze bearings
Maximum radial load on output shaft 25N
Maximum axial load on output shaft 20N
Maximum continuous output power 15 watts
Output shaft sealed to eliminate grease escaping from the gearbox
Comprehensive instruction sheet supplied giving fitting instructions
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters
관련된 링크들
- McLennan Servo Supplies Spur Gearbox, 25:1 Gear Ratio, 4 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 50:1 Gear Ratio, 4 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 500:1 Gear Ratio, 7 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 125:1 Gear Ratio, 5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 100:1 Gear Ratio, 4 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 5:1 Gear Ratio, 1.5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 25:2 Gear Ratio, 2.5 Nm Maximum Torque
- McLennan Servo Supplies Spur Gearbox, 100:1 Gear Ratio, 0.5 Nm Maximum Torque