Infineon 2EDL23I06PJXUMA1 MOSFET Gate Driver 2, 1.8 A 14-Pin 17.5V, DSO

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (5 units, in packs of 5)*

₩18,660.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 900 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
5 +₩3,732.00₩18,660.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
226-6037
제조사 부품 번호:
2EDL23I06PJXUMA1
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Product Type

Gate Driver

Output Current

1.8A

Pin Count

14

Package Type

DSO

Fall Time

60ns

Driver Type

MOSFET

Number of Outputs

2

Rise Time

48ns

Minimum Supply Voltage

13V

Number of Drivers

2

Maximum Supply Voltage

17.5V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Length

8.75mm

Standards/Approvals

No

Height

1.75mm

Width

4mm

Series

2EDL23I06PJ

Mount Type

Surface

Automotive Standard

No

Infineon 2EDL23I06PJ Series Gate Driver, 1.8A Output Current, 13V Minimum Supply Voltage - 2EDL23I06PJXUMA1


This gate driver provides a Compact MOSFET driving solution for dual-output switching applications, designed to operate from a low-voltage supply up to mid-range voltages. It is intended for surface-mount circuit designs where a small footprint and low profile are required, and it is suitable for control of MOSFET Gates in power conversion and motor-drive contexts.

Features and Benefits:


• Dual driver channels deliver two independent outputs for gate control
• 1.8A output current supports moderate gate charging speeds
• 48ns rise time enables Rapid turn-on transitions
• 60ns fall time ensures swift turn-off behaviour
• Operates from 13V to 17.5V supply for flexible system integration
• Rated for -40 to125°C operation for wide thermal environments

Applications


• Used with synchronous buck converters in Compact power supplies
• Suitable for half-bridge and full-bridge MOSFET gate control
• Ideal for motor-drive gate switching in industrial electronics
• Can be used for isolated gate-driving stages on surface-mounted boards
• Used for power-stage testing where fast switching is required

How is the device packaged for PCB assembly?


It is supplied in a 14-pin DSO surface-mount package with a low-profile 1.75mm body height.

What mechanical footprint should designers allow for on the board?


The package measures 8.75 x 4 mm, enabling Compact module placement in dense layouts.

What thermal limits must be observed during operation?


The device is specified to function across a temperature range from -40 to 125°C.

How many outputs are available and what is their nature?


There are two independent outputs configured for MOSFET gate driving.

What is the maximum supply voltage that may be applied?


The supply voltage must not exceed 17.5V to remain within rated limits.

관련된 링크들