SKF Rubber Metal Reinforced Radial Shaft Seal Rotary Shaft Seal, 72 mm ID, 100 mm OD

This rotary shaft seal provides a sealing solution for rotating equipment where oil containment and environmental exclusion are required. It is designed for radial installation on shafts and suits industrial settings in automation, electronics, electrical and mechanical sectors. The component uses compounded elastomer and metal reinforcement to maintain sealing contact under dynamic conditions.

• Rubber–metal reinforced construction for sustained sealing performance
• Rated to operate up to 200°C for high-temperature applications
• Withstands environments down to -25°C for cold-start reliability
• Conforms to ISO 6194 for dimensional and functional consistency
• Meets DIN 3760 for interchangeability with common industry components

• Suitable for pumps requiring oil retention in manufacturing plants
• Ideal for electric motor shaft sealing in control cabinets
• Used with gearboxes in conveyor and automation systems
• Can be used for rotating assemblies in test and measurement rigs

The seal fits shafts with an internal diameter of 72mm, ensuring correct radial contact for effective fluid retention.

The axial thickness is 10mm which provides a Compact profile while maintaining adequate lip engagement and axial stability in housings.

The outer diameter of the component is 100mm, so housings must permit a press-fit or appropriate retention for that outside measurement.

The construction combines elastomeric sealing material bonded to a metallic reinforcement to preserve lip preload and resist distortion during operation.