제조사부품번호

SKF Nitrile Rubber (NBR) Rotary Shaft Seal, 34.93 mm ID, 47.6 mm OD

RS 제품 번호:: 587-477
제조사 부품 번호:: 13535
제조업체:: SKF

SKF Nitrile Rubber (NBR) Rotary Shaft Seal, 34.93 mm ID, 47.6 mm OD

모든 Gaskets & O-Rings 열람하기

Subtotal (1 pack of 5 units)*

₩137,689.50

현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.

팩	한팩당	한팩당*
1 +	₩137,689.50	₩27,537.90

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 587-477
제조사 부품 번호:: 13535
제조업체:: SKF

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SKF
	Product Type	Rotary Shaft Seal
	Material	Nitrile Rubber (NBR)
	Inside Diameter	34.93mm
	Outside Diameter	47.6mm
	Thickness	7.95mm
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	100°C
	Standards/Approvals	No

	모두 선택
	브랜드 SKF
	Product Type Rotary Shaft Seal
	Material Nitrile Rubber (NBR)
	Inside Diameter 34.93mm
	Outside Diameter 47.6mm
	Thickness 7.95mm
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 100°C
	Standards/Approvals No

Datasheet - 13535

The SKF Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. Seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.

For oil or grease

With garter spring

WAVE lip creates higher pumping rate

WAVE lip has less friction between shaft and lip

WAVE lip has a lower temperature at the contact point

SKF Nitrile Rubber (NBR) Rotary Shaft Seal, 34.93 mm ID, 47.6 mm OD

관련된 링크들