Eaton 30 A Rail Mount Fuse Holder, 3P-Pole, 600 V ac
- RS 제품 번호:
- 182-1796
- 제조사 부품 번호:
- CHCC3DU
- 제조업체:
- Eaton
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩168,786.40
재고있음
- 20 개 단위 배송 준비 완료
- 추가로 2026년 3월 23일 부터 70 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 1 | ₩168,786.40 |
| 2 + | ₩164,594.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 182-1796
- 제조사 부품 번호:
- CHCC3DU
- 제조업체:
- Eaton
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Eaton | |
| Product Type | Rail Mount Fuse Holder | |
| Current Rating | 30 A | |
| Voltage | 600 V ac | |
| Number of Poles | 3 | |
| Rail Type | DIN 35 mm | |
| Indicator | No | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | UL, CCC, CSA | |
| Series | Bussmann | |
| Terminal Type | Screw | |
| 모두 선택 | ||
|---|---|---|
브랜드 Eaton | ||
Product Type Rail Mount Fuse Holder | ||
Current Rating 30 A | ||
Voltage 600 V ac | ||
Number of Poles 3 | ||
Rail Type DIN 35 mm | ||
Indicator No | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals UL, CCC, CSA | ||
Series Bussmann | ||
Terminal Type Screw | ||
- COO (Country of Origin):
- CN
Eaton Rail Mount Fuse Holder, 3 Poles, 10 x 38 mm Fuse CHCC3DU
Need to protect your electronic equipment from short circuit and overload conditions? This 3-pole Eaton rail mount fuse holder will ensure that voltage doesn't creep to other components. It can be quickly and easily snapped onto a DIN rail, so you can organise your installation neatly. This device comes with an optional hex-head terminal screw that lets you apply the necessary torque values.
• Current rating of 30 A and voltage rating of 600 V for versatile application
• Compatible with standard fuse sizes of 10 x 38 mm
• For use with 75°C or 90°C wire, fine stranded wire, spade terminals and comb-bus bars to suit your setup
• Easy-to-use screw terminal type
• Colour-coded for safety
Why do I need a fuse holder?
A fuse holder is used to integrate fuses into an electrical circuit so that it can perform its function safely and effectively.
How do I clean a fuse holder?
First, ensure that the mains power is off and you're wearing gloves. Then use a dry cloth or toothbrush to clean the connector springs, some emery cloth wrapped around a screwdriver to wipe the fuse housing, and a small paintbrush to apply lubricant to all parts of the device.
Note
Eaton formerly known as Bussmann
관련된 링크들
- Eaton 30 A Rail Mount Fuse Holder, 3P-Pole, 600 V ac
- Eaton 30 A Rail Mount Fuse Holder, 2P-Pole, 600 V ac
- Eaton 30 A Fuse Holder for 10 x 38 mm, 3P-Pole, 600 V ac/dc
- Eaton 30 A Fuse Holder, 2P-Pole, 48 V dc
- Eaton 30 A Fuse Holder, 1P-Pole, 600 V ac/dc
- Eaton 30 A Fuse Holder for 10 x 38 mm, 1P-Pole, 48 V
- Eaton 30 A Fuse Holder for 10 x 38 mm, 1P-Pole, 48 V dc
- Eaton 30 A Fuse Holder, 3P-Pole, 48 V dc