3M 7100363472 VHB LVO Black Foam Tape, 19mm x 33 m, 1.6 mm Thick

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Foam Tapes 열람하기

Subtotal (1 unit)*

₩156,640.00

Add to Basket
수량 선택 또는 입력
마지막 RS 재고
  • 최종적인 167 개 unit(s)이 배송 준비 됨
수량
한팩당
1 +₩156,640.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
608-870
제조사 부품 번호:
7100363472
제조업체:
3M
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

3M

Product Type

Foam Tape

Width

19mm

Thickness

1.6mm

Length

33m

Backing Material

Acrylic Foam

Colour

Black

Adhesion Strength

44N/cm

Foam Density

540kg/m³

Single/Double Sided

Double Ended

Trade Name

VHB LVO

Adhesive Material

Synthetic Rubber

Minimum Operating Temperature

10°C

Tensile Strength

660kPa

Standards/Approvals

FDA 21 CFR 175.105, VDA278, VDA270

Maximum Operating Temperature

121°C

Model Number

7100363472

제외

COO (Country of Origin):
US

3M Foam Tape, 19mm Width, 1.6mm Thickness - 7100363472


This foam tape is a double-sided adhesive designed for bonding and sealing applications in industrial settings. It combines an acrylic foam backing with a synthetic rubber adhesive to provide a compact, black mounting solution suited to automation, electronics, electrical and mechanical contexts. The product is supplied on a 33 m roll and is engineered for use across a range of temperature conditions.

Features & Benefits


• High-density 540 kg/m³ foam gives consistent compression recovery
• 660 kPa tensile strength supports secure load-bearing joints
• Heat-resistant up to 121 °C maintains adhesion under elevated temperatures
• Thin 1.6 mm profile enables low-gap mounting and neat finishes
• Double-ended adhesive allows bonding on both surfaces

**Applications**


• Suitable for securing control-panel components in automation systems
• Ideal for mounting heat sinks or cable channels in electronics assemblies
• Used for fastening trim and components in electrical enclosures
• Can be used for vibration-damping joints in mechanical assemblies
• Suitable for exterior-facing bonding where weather resistance is required

What materials make up the adhesive and backing layers?


The adhesive layer is a synthetic rubber formulation and the backing is an acrylic foam substrate.

How does the tape perform where regulatory cleanliness is required?


It meets FDA 21 CFR 175.105 for materials permitted in repeated food-contact-related use cases.

Are there industry approvals relevant to automotive applications?


The product conforms to VDA 278 and VDA 270 standards commonly referenced in vehicle interior and exterior bonding.

What colour and width are available for Visual and fit considerations?


The tape is supplied in black with a width of 19 mm for narrow-profile mounting.

관련된 링크들