RS PRO, Side Entry, Float Valve, 1/2in
- RS 제품 번호:
- 802-070
- 제조업체:
- RS PRO
가격 개당**
Was ₩45,718.40
귀하의 지불
₩20,020.00
55 <재고있음> 5-9영업일내 홍콩 발송*
* 배송 날짜는 선택한 수량과 배송 주소에 따라 달라질 수 있습니다.
수량 | 한팩당 |
---|---|
1 + | ₩20,020.00 |
**다른 단위에 대한 가격 표시
- RS 제품 번호:
- 802-070
- 제조업체:
- RS PRO
- COO (Country of Origin):
- GB
RS PRO 1/2in Side Entry Float Valve
Need to control the level of liquid in a tank? This float valve from RS PRO will detect changes of elevation in the liquid level and open or close accordingly. It fits most tanks and cisterns and can be fitted through a side inlet.
The valve is manufactured from engineering resin with an impressive tensile strength of 4 tonnes, so you're assured a tough and hardwearing part. It features a removable filter that's easy to clean. It can be used at pressures between 0.15 bar and 14 bar. The tail is one-and-a-quarter inches long and has a half-inch male thread.
The valve is approved by the Water Regulations Advisory Scheme (WRAS) as suitable for use in installations carrying water from the public mains supply. Float valves of this kind are commonly found in reservoirs, storage tanks and condensate tanks.
The valve is manufactured from engineering resin with an impressive tensile strength of 4 tonnes, so you're assured a tough and hardwearing part. It features a removable filter that's easy to clean. It can be used at pressures between 0.15 bar and 14 bar. The tail is one-and-a-quarter inches long and has a half-inch male thread.
The valve is approved by the Water Regulations Advisory Scheme (WRAS) as suitable for use in installations carrying water from the public mains supply. Float valves of this kind are commonly found in reservoirs, storage tanks and condensate tanks.
Features and Benefits
1/2in float valve
Side entry
Quiet operation
Connection size of 1/2 in
Minimum working pressure 0.15 bar
Maximum working pressure of 14 bar
Fits most tanks and cisterns
4 ton tensile strength engineering resin
Tail length of 1 1/4 in (1/2 in Male BSP Thread)
Removable easy to clean filter
WRAS approved
Side entry
Quiet operation
Connection size of 1/2 in
Minimum working pressure 0.15 bar
Maximum working pressure of 14 bar
Fits most tanks and cisterns
4 ton tensile strength engineering resin
Tail length of 1 1/4 in (1/2 in Male BSP Thread)
Removable easy to clean filter
WRAS approved
Why RS PRO?
RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.
속성 | 값 |
---|---|
Type | Side Entry |
Connection Size | 1/2in |
Maximum Working Pressure | 14 bar |
Float Included | Yes |
Float Material 1 | Plastic |
Float Material 2 | Plastic |