Sensata / Cynergy3 MS Series Cable Float Switch, 5 m Cable, SPNC, 250 V ac Max, 24 V dc Max

모든 Float Switches 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩73,808.80

Add to Basket
수량 선택 또는 입력
제한된 재고
  • 11 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 5₩73,808.80
6 - 11₩70,876.00
12 +₩67,886.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
338-9794
제조사 부품 번호:
MS10B
제조업체:
Sensata / Cynergy3
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Sensata / Cynergy3

Product Type

Float Switch

Mount Type

Cable

Switch Output

SPNC

Housing Material

High Density Polyethylene

Cable Length

5m

Minimum Operating Temperature

0°C

Maximum Operating Temperature

45°C

Maximum AC Voltage

250V

Maximum DC Voltage

24V

Maximum Current

10A

Maximum Pressure

10bar

Standards/Approvals

UL, VDE

Hazardous Area Certification

No

Series

MS

COO (Country of Origin):
CN

Sensata Cynergy3 Float Switch, NC, 5m - MS Series - MS10B


Need a float switch to install with your submersible pump? This unit from Sensata Cynergy3 is designed for use in large tanks, cisterns and reservoirs. It's rated to 10 bar so it can be submerged up to 100m deep. The switch's case is made from blow-moulded polyethylene (PE), with non-hygroscopic, closed-cell expanded polyurethane injected around the switch housing to hermetically seal the workings. The normally closed (NC) output turns the circuit off when the liquid rises above a set level. Thanks to direct power switching, this is an easy choice to operate.

Features and Benefits


• Moving stainless-steel ball actuator gives an electrical life of 200,000 operations

• Rated at 750V AC and 25W DC, which means it can handle high loads

• Operating temperature range of 0°C to +45°C, for versatile use in a wide range of environments

• Certified to Restriction of Hazardous Materials (RoHS) standards, so it won't release harmful chemicals if damaged

What type of fluids can the float switch be used in?


The switch can be used in both salt and fresh water as well as in food oils. It's not recommended for use in alcohols, fuel or machine oils.

Cynergy3 MS Series Float Switches


The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches are capable of reaching 100m in depth.

MS float switches come with a 5m PVC cable.

What is it made from?

The flow switch case is made from blow-moulded HDPE (polyethylene). The unit is hermetically sealed. The cable is made from PVC and has a protective earth conductor. Part numbers ending with the letter “U” have PUR cables suitable for use in fuel oils.

What temperatures can it operate in?

All MS float switches operate from 0°C to +45°C / +32°F to 113°F.

What contact types are there?

The 5th digit of the part number represents the contact type:

A - Normally Open (N/O)

B - Nortmally Closed (N/C)

C - Changeover (C/O)

Approvals:

MS float switches have UL, VDE and CENELEC approvals. Part numbers ending with a "W" are WRAS approved cable coverings.

Versions Available:

(205-6910) MS10A

(338-9801) MS20A

(338-9794) MS10B

(869-7609) MS20C

(379-4001) MS10AW

(379-4017) MS10BW

관련된 링크들