Sensata Cynergy3 RSF50 Series Vertical Polyphenylene Sulfide Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc

The RSF50 series of compact vertical float switches have a single switching point, mounting is either from the top or bottom of the tank therefore access to the inside of the tank is required. These float switches are ideal for vending machine, printing systems, and chemical dosing applications.

Manufactured in a variety of materials with a choice of gasket materials to suit most commonly used liquids
Mounting in top or bottom of tank
N/O versions can be configured as N/C by float inversion
All units WRAS approved for use in hot and cold water

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

The cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.

epoxy sealed leadouts

The vertical float switch from Sensata Cynergy3's RSF50 series is a compact, durable choice for detecting liquids in tanks. Its robust body is manufactured from high-performance polyphenylene sulfide (PPS) that delivers a reliably long service life. The switch's normally open/normally closed (NO/NC) output means you can use it to switch a circuit on or off when the liquid reaches a certain level. The direction of the switch can be reversed by removing the float, inverting the switch and refitting it to the stem. A float length of just 44mm makes this a space-efficient option that's ideal for use in small tanks.

• Operating temperature range of -10°C to +100°C makes it suitable for a range of environments
• 1m epoxy sealed flying lead allows flexible connection
• Silicone and Viton gaskets provide a secure, chemical-resistant seal

Switches of this type are commonly found in vending machines, printing systems and chemical-dosing equipment.

This switch is fitted with an M12 size mounting thread for fitting to standardised systems.