Sensata / Cynergy3 RSF50 Series Vertical Nitrile Rubber (NBR) Float Switch, 1 m Cable, NO/NC, 240 V ac Max, 120 V dc Max

모든 Float Switches 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩39,574.00

Add to Basket
수량 선택 또는 입력
제한된 재고
  • 1,274 개 단위 배송 준비 완료
  • 추가로 2026년 2월 09일 부터 252 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 5₩39,574.00
6 - 11₩37,957.20
12 +₩37,581.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
331-017
제조사 부품 번호:
RSF53Y100JC
제조업체:
Sensata / Cynergy3
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Sensata / Cynergy3

Product Type

Float Switch

Mount Type

Vertical

Switch Output

NO/NC

Housing Material

Nylon

Cable Length

1m

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

75°C

Maximum AC Voltage

240V

Maximum DC Voltage

120V

Maximum Current

600mA

Gasket Material

Nitrile Rubber (NBR)

Standards/Approvals

WRAS

Series

RSF50

Hazardous Area Certification

No

COO (Country of Origin):
CN

Sensata Cynergy3 Vertical Float Switch, NO/NC, 1 m - RSF50 Series - RSF53Y100JC


Choose this compact float switch from Sensata when you need to precisely monitor liquid levels. It's a vertical switch, so you can mount it on the top or at the bottom of a container, making it an ideal solution when there's no side access to a tank.

It has NO (normally open) or NC (normally closed) options for flexibility in the layout of your electrical circuit. As this component is made from chemical-resistant nylon, you can use it with a wide range of substances, including oils, organic chemicals and printing inks.

Features and Benefits


• Nitrile rubber gasket for resistance to corrosion and abrasion

• Supplied with epoxy-sealed lead-outs for easy connection

• Wide operating temperature range of -20°C to +75°C for use in demanding environments

• 1 m cable for flexible connection

• Standard M12 mounting thread

How does this switch open and close?


A vertical float switch like this one has a magnet mounted inside the float, along with a reed switch in its body. The float fits around the stem and rises and falls with the level of the liquid. When the float nears the reed switch, the magnetic force causes the switch to open or close.

Cynergy3 RSF50 Series Float Switches


Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.

There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids.

The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem.

Within the series there are 5 ranges:

RSF53 (black) - Nylon

RSF54 (opaque) - Polypropylene (WRAS approved)

RSF56 (grey) - Polyphenylene Sulphide (PPS)

RSF57 (green) - Polyvinylidene Fluoride (PVDF)

RSF58 (white) - Polypropylene (UL approved)

Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications.

What contact types are there?

The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation.

What mounting thread does it have?

RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT.

Note

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

Warning

The cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.

Supplied with

epoxy sealed leadouts

관련된 링크들