Nexperia 74HC574D,652 Octal D Type Flip Flop IC, 3-State, 20-Pin SOIC

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Flip Flop ICs 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
포장 옵션
RS 제품 번호:
483-6623
제조사 부품 번호:
74HC574D,652
제조업체:
Nexperia
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Nexperia

Logic Family

HC

Logic Function

D Type

Input Type

Single Ended

Output Type

3 State

Output Signal Type

Single Ended

Triggering Type

Positive Edge

Polarity

Non-Inverting

Mounting Type

Surface Mount

Package Type

SOIC

Pin Count

20

Number of Elements per Chip

8

Maximum Propagation Delay Time @ Maximum CL

150 ns @ 2 V

Dimensions

13 x 7.6 x 2.45mm

Maximum Operating Supply Voltage

6 V

Length

13mm

Maximum Operating Temperature

+125 °C

Width

7.6mm

Minimum Operating Temperature

-40 °C

Propagation Delay Test Condition

50pF

Minimum Operating Supply Voltage

2 V

Height

2.45mm

The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Mixed 5 V and 3.3 V applications

Improved signal integrity with integrated termination resistors

High noise immunity

Flow through pin out for easy layout

Wide supply voltage range

Low propagation delay

Overvoltage tolerant input options

Integrated source termination resistor options

Bus hold options

Key applications

Frequency division

Controlled delays

Interface between asynchronous and synchronous systems

관련된 링크들