Nexperia 74HCT574D,653 8 Flip Flop IC 74HCT, 3 State, 20-Pin SO
- RS 제품 번호:
- 170-8020
- 제조사 부품 번호:
- 74HCT574D,653
- 제조업체:
- Nexperia
대량 구매 할인 기용 가능
Subtotal (1 reel of 2000 units)*
₩1,006,200.00
일시적 품절
- 2026년 11월 03일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 릴당* |
|---|---|---|
| 2000 - 8000 | ₩503.10 | ₩1,006,590.00 |
| 10000 + | ₩493.35 | ₩986,310.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 170-8020
- 제조사 부품 번호:
- 74HCT574D,653
- 제조업체:
- Nexperia
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | 74HCT | |
| Input Type | TTL | |
| Output Type | 3 State | |
| Clock Frequency | 20MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | SO | |
| Minimum Supply Voltage | 4.5V | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 5.5V | |
| Maximum Propagation Delay Time @ CL | 50ns | |
| Flip-Flop Type | D Flip-Flop | |
| Trigger Type | Positive Edge | |
| Minimum Operating Temperature | -40°C | |
| Number of Elements per Chip | 8 | |
| Maximum Operating Temperature | 125°C | |
| Height | 2.45mm | |
| Length | 13mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family 74HCT | ||
Input Type TTL | ||
Output Type 3 State | ||
Clock Frequency 20MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type SO | ||
Minimum Supply Voltage 4.5V | ||
Pin Count 20 | ||
Maximum Supply Voltage 5.5V | ||
Maximum Propagation Delay Time @ CL 50ns | ||
Flip-Flop Type D Flip-Flop | ||
Trigger Type Positive Edge | ||
Minimum Operating Temperature -40°C | ||
Number of Elements per Chip 8 | ||
Maximum Operating Temperature 125°C | ||
Height 2.45mm | ||
Length 13mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
관련된 링크들
- Nexperia 74HCT74D,653 2 Flip Flop IC 74HCT, D Type, 14-Pin SO
- Nexperia 74HCT273D,653 8 Flip Flop IC 74HCT, D Type, 20-Pin SO
- Nexperia 74HC574D,653 8 Flip Flop IC 74HC, 3 State, 20-Pin SO
- Nexperia 8 Flip Flop IC 74HCT, D Type, 20-Pin SO
- Nexperia 74HC74D,653 2 Flip Flop IC 74HC, D Type, 14-Pin SO
- Nexperia 74HCT74D 2 Flip Flop IC HCT, CMOS, 14-Pin SOIC
- Texas Instruments SN74HCT574DW 8 Flip Flop IC HCT, 3 State, 20-Pin SOIC
- Nexperia 74HCT245D,653 18 Bus Transceiver 74HCT, 3 State, 20-Pin SO