Microchip Split Gate 8 MB SPI Flash Memory 8-Pin SOIC, SST26WF080B-104I/SN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Flash Memory 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
869-6195
제조사 부품 번호:
SST26WF080B-104I/SN
제조업체:
Microchip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Microchip

Product Type

Flash Memory

Memory Size

8MB

Interface Type

SPI

Package Type

SOIC

Pin Count

8

Maximum Clock Frequency

104MHz

Mount Type

Surface

Cell Type

Split Gate

Minimum Supply Voltage

1.65V

Maximum Supply Voltage

1.95V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Standards/Approvals

No

Height

1.25mm

Length

4.9mm

Series

SST26WF080B

Automotive Standard

No

Number of Words

1M

Number of Bits per Word

8

Maximum Random Access Time

3ns

SST26WF040B/080B/016B Serial Quad I/O (SQI) SuperFlash® Flash Memory


From Microchip the SST26WFxxxB family of products are Serial Quad I/O (SQI) Flash Memory devices available in 4-, 8- and 16-bit variants. These devices support full command-set compatibility with Serial Peripheral Interface (SPI) protocol and enable minimum latency Execute-in-Place (XIP) capability without the need for code shadowing on an SRAM. The SST26WFxxxB devices exhibit low power consumption, making them suitable for portable battery powered applications.

Features


Operating Voltage Range 1.6 to 1.95 V

Clock Frequency 104 MHz max

Serial Interface Architecture

Low Power Consumption: Active Read Current: 15 mA (typical at 104 MHz), Standby Current: 10 μA (typical)

Burst Modes: Continuous Linear Burst, 8/16/32/64 Byte Linear Burst with Wrap-Around

Page-Program: 256 Bytes per page in x1 or x4 mode

Fast Erase Time: Sector/Block Erase 18 MS (typ), 25 MS (max); Chip Erase 35 MS (typ), 50 MS (max)

Flexible Erase Capability

End-of-Write Detection

Write-Suspend

Software Protection

Software Reset (RST) Mode

SFDP (Serial Flash Discoverable Parameters)

Flash Memory, Microchip


관련된 링크들