Festo MS Filter Regulator, 40 μm, 1/2 in G, Manual, 20 bar, 588774

This filter/regulator assembly provides conditioned compressed Air by combining particulate removal with pressure regulation for industrial pneumatic systems. It is intended for use where Airflow management and particulate filtration are required within automated and mechanical setups, operating across typical workshop temperature ranges and moderate pressures.

• 40μm element delivers particle removal to protect downstream valves and actuators
• 4500 l/min maximum flow supports high-demand pneumatic circuits
• Manual drain allows controlled condensate removal without tools
• Polycarbonate bowl offers Visual fluid-level inspection for maintenance
• Rated to 20 bar working pressure for robust system regulation
• Operates between -10°C and 60°C for varied environmental conditions

• Suitable for compressed Air supply to assembly-line actuators
• Ideal for plant Air header conditioning before control valves
• Used with pneumatic tools requiring clean, regulated Air
• Can be used for instrumentation racks needing steady pressure
• Suitable for workshop filtration upstream of Air dryers

It uses a G-threaded 1/2 in port compatible with BSPP fittings for direct pipework integration.

The transparent polycarbonate construction permits Visual checks of accumulated condensate and contaminant levels without dismantling.

The device can deliver up to 4500 l/min, maintaining pressure regulation under substantial volumetric draw when installed correctly.

Avoid operation below -10°C or above 60°C to maintain material performance and regulator stability.