제조사부품번호

SMC 1/2 in FRL Assembly, 5 μm Filtration Size Integrated Pressure Gauge

RS 제품 번호:: 255-3218
제조사 부품 번호:: AC40A-F04E-D
제조업체:: SMC

SMC 1/2 in FRL Assembly, 5 μm Filtration Size Integrated Pressure Gauge

본 제품군 열람하기

Subtotal (1 unit)*

₩251,500.00

재고있음

추가로 2026년 11월 16일 부터 12 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩251,500.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 255-3218
제조사 부품 번호:: AC40A-F04E-D
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Product Type	FRL Assembly
	Port Size	1/2 in
	Maximum Flow Rate	6500L/min
	Integrated Pressure Gauge	Yes
	Connection Thread Standard	G
	Series	AC
	Filtration Size	5μm
	Pressure Gauge Port Size	1/8 in
	Overall Length	280mm
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	60°C
	Maximum Operating Pressure	10 bar
	Overall Width	105mm
	Standards/Approvals	RoHS
	Overall Height	270mm
	Bowl Material	Polycarbonate
	Pressure Setting Range	0.05 → 0.85 MPa

	모두 선택
	브랜드 SMC
	Product Type FRL Assembly
	Port Size 1/2 in
	Maximum Flow Rate 6500L/min
	Integrated Pressure Gauge Yes
	Connection Thread Standard G
	Series AC
	Filtration Size 5μm
	Pressure Gauge Port Size 1/8 in
	Overall Length 280mm
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 60°C
	Maximum Operating Pressure 10 bar
	Overall Width 105mm
	Standards/Approvals RoHS
	Overall Height 270mm
	Bowl Material Polycarbonate
	Pressure Setting Range 0.05 → 0.85 MPa

Datasheet - AC40A-F04E-D

COO (Country of Origin):: CN

SMC Series AC FRL Assembly, 6500L/min Maximum Flow Rate, 10 Bar Maximum Operating Pressure - AC40A-F04E-D

This frl assembly is a Compact Air-treatment combination designed to prepare compressed Air for industrial control and actuation systems. It integrates filtration, pressure regulation and lubrication in a single unit for installation in pneumatic supply lines, handling typical shop-floor environments where steady pressure control and particulate removal are required.

Features & Benefits

• 5μm filtration protects downstream valves and actuators
• 0.05 to 0.85MPa regulator range enables precise pressure control
• 6500L/min maximum flow supports high-demand pneumatic systems
• Polycarbonate bowl with lubricator facilitates visible oil supply monitoring
• Maximum operating pressure 10 bar provides robust system margin
• Pressure gauge port 1/8in allows convenient pressure feedback fitting

Applications

• Suitable for pneumatic control panels requiring regulated Air supply
• used with cylinder arrays in automated assembly lines
• Ideal for Air-operated tools needing lubrication and filtration
• Can be used for preparatory Air treatment in test rigs
• Suitable for compressed Air distribution headers in workshops

What temperature limits apply to use in warm environments?

The unit is rated for medium temperatures up to 60°C and down to -5°C provided there is no freezing.

How is residual pressure handled during system venting?

The body incorporates a relieving exhaust mechanism to reduce downstream pressure when the set point is lowered.

What materials are used for the sight bowl and lubricant reservoir?

The bowl is MADE from polycarbonate and the lubricator holds 135cm³ of oil capacity.

What thread standard and inlet connection are supplied?

The unit uses a G-thread standard and the main port size is 1/2in.

How large is the drain capacity for filtered condensate?

The drain port capacity is specified at 45cm³ for condensate removal.