StarTech.com LC Multimode Fibre Optic Transceiver Module, Full Duplex, 25Gbps

본 제품군 열람하기

Subtotal (1 unit)*

₩255,260.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 05일 부터 18 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩255,260.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
756-669
제조사 부품 번호:
JL484A-ST
제조업체:
StarTech.com
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

StarTech.com

Product Type

Fibre Optic Transceiver

Wavelength

850nm

Standards/Approvals

RoHS

Network Speed

25Gbps

Fibre Operating Mode

Full Duplex

Maximum Transfer Distance

100m

Connection Port

LC

Fibre Type

Multimode

Maximum Data Transfer Rate

25.78Gbps

COO (Country of Origin):
CN

StarTech Fibre Optic Transceiver, 25 Gbps Network Speed, 100m Maximum Transfer Distance - JL484A-ST


This Fibre optic transceiver provides a Compact solution for high-speed network links in industrial and technical environments. It converts electrical signals to optical transmission for short-reach multimode Fibre connections, operating at an 850 nm Wavelength and using an LC interface. The module is intended for full-duplex optical networks requiring elevated data throughput within confined link distances.

Features and Benefits:


• 25 Gbps signalling supports high-bandwidth data flows
• 25.78 Gbps maximum throughput enables headroom for bursts
• 850 nm Wavelength matches multimode short-reach infrastructure
• LC connection offers Compact duplex Fibre interfacing
• Multimode design maintains signal integrity over short distances
• RoHS conformity reduces hazardous substance content

Applications


• Suitable for short-reach data centre interconnects over multimode Fibre
• Ideal for automation control systems requiring low-latency links
• Used for high-speed instrumentation networks in electronics labs
• Can be used for Fibre-backbone segments in industrial facilities
• Used with switching equipment that accepts SFP28-compatible modules

What distance can I expect for reliable transmission?


The transceiver is designed for up to 100 m over multimode Fibre using the specified Wavelength and connector type.

Does it support simultaneous two-way communication?


Yes, it operates in full-duplex mode, allowing concurrent transmit and receive channels on the duplex LC link.

Which connector type is required on the cabling side?


Duplex LC terminations are required to mate with the module’s optical ports for link establishment.

What Fibre type must be used for correct operation?


Multimode Fibre is required to match the 850 nm optical characteristics and achieve the rated distance.

관련된 링크들