RS PRO Plastic Fibre Optic Sensor 0.01 mm, PNP Output IO-Link, 1.44 W, IP54, 24 V dc

모든 Fibre Optic Sensors 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩156,246.80

Add to Basket
수량 선택 또는 입력
재고있음
  • 228 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩156,246.80
5 +₩128,592.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
204-0682
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Detection Range

0.01 mm

Output Type

PNP

Fibre Optic Type

Plastic

Terminal Type

2m PVC cable

Response Time

<0.0002 (Fine mode) seconds, <0.0003 (Turbo mode) seconds, <0.00055 (Super) seconds

Power Consumption

1.44 W

IP Rating

IP54

Supply Voltage

24 V dc

Interface

IO-Link

COO (Country of Origin):
CN

RS PRO Fibre Optic Sensor, PNP Output


RS PRO introduces the fantastic fibre optic sensor with PNP output. Fibre optic sensors are a type of proximity sensor that has an optical fibre connected to a light source to allow for detection in tight spaces or where a small profile is beneficial. The optical fibre is a transparent fibre made of glass (silica) or plastic with a diameter slightly thicker than a human hair, this fibre transmits light between the two ends to produce an electrical signal.

Features and Benefits


  • Optional high performance output time delay of 0ms, 10 ms or 40ms to suit suit your needs

  • Three optional modes for high speed response time as well of ＜200us (Fine mode); ＜300us (Turbo mode); ＜550us (Super)

  • Operating temperature of -10°C to 50°C with no freezing to be able to meet your needs in a variety of environments

  • Vibration resistance of 10 to 55 Hz with a 0.5mm double amplitude for 2 hours each in X, Y, and Z directions

  • Shock resistance of 500 m/s2 for 3 times each in X, Y, and Z directions

  • Relative air humidity of 35∼85% with no condensation

  • Operating supply voltage of 12...24 VDC

  • Comes with circuit protection technology including surge protection, reverse polarity and overload protection providing safety for yourself and your tool

  • PNP sensors produce a positive output to your industrial controls input

  • Compatible probes 896-7298 and 896-7285

Applications


Fibre optic sensors are used in a number of different sensing applications. In mechanical properties testing, fibre optical sensors are used to measure mechanical strain. They can also be used to measure acceleration, velocity, pressure, temperature and displacement. Used in a variety of workplaces including

Oil Industry
Gas Industry
Textiles
Ships and offshore structures
Aerospace

How Do Fibre Optic Sensors Work


A fibre-optic sensor system is a technology that consists of a fibre-optic cable connected to a remote sensor, or amplifier. The sensor emits, receives, and converts the light energy into an electrical signal. The optical cable is the mechanical component that transports the light into and out of areas that are either too space constrained or too hostile back to the sensor.

Why RS PRO?


RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.

관련된 링크들