제조사부품번호

Broadcom SP000063855 5 MBd 700 nm Fibre Optic Receiver, Round, Push In Collet Connector

RS 제품 번호:: 696-1844
제조사 부품 번호:: SP000063855
제조업체:: Broadcom

Broadcom SP000063855 5 MBd 700 nm Fibre Optic Receiver, Round, Push In Collet Connector

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩30,380.00

307 개 단위 배송 준비 완료
추가로 2026년 10월 06일 부터 25 개 단위 배송
추가로 2026년 10월 26일 부터 375 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 31	₩30,380.00
32 - 62	₩29,700.00
63 +	₩29,080.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 696-1844
제조사 부품 번호:: SP000063855
제조업체:: Broadcom

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Broadcom
	Maximum Data Rate	5MBd
	Product Type	Fibre Optic Receiver
	Connector Shape	Round
	Wavelength of Peak Sensitivity	700nm
	Typical Rise Time	14ns
	Typical Fall Time	4ns
	Number of Pins	5
	Mount Type	Through Hole
	Connector Type	Push In Collet
	Standards/Approvals	No
	Width	9.2mm
	Length	24.2mm
	Height	9mm
	Output Signal Type	TTL
	Series	SFH

	모두 선택
	브랜드 Broadcom
	Maximum Data Rate 5MBd
	Product Type Fibre Optic Receiver
	Connector Shape Round
	Wavelength of Peak Sensitivity 700nm
	Typical Rise Time 14ns
	Typical Fall Time 4ns
	Number of Pins 5
	Mount Type Through Hole
	Connector Type Push In Collet
	Standards/Approvals No
	Width 9.2mm
	Length 24.2mm
	Height 9mm
	Output Signal Type TTL
	Series SFH

Datasheet

Broadcom SFH Series Fibre Optic Receiver, 24.2mm Length, 5 Pins - SP000063855

This Fibre optic receiver converts optical signals into TTL electrical outputs for use in electronic assemblies. It is intended for through-hole mounting and is suitable where a Compact optical-to-digital Interface is required. The device is optimised for operation around a visible near-red Wavelength and supports moderate data-rate transmission for control and detection tasks.

Features and Benefits:

• TTL output simplifies direct digital interfacing
• Peak sensitivity at 700nm for near-red detection
• Typical rise time 14ns for Rapid signal acquisition
• Typical fall time 4ns for fast signal clearance
• Maximum data rate 5MBd for moderate-speed links
• Five-pin configuration enables straightforward connectivity

Applications

• Suitable for inline optical-to-digital sensor modules
• Ideal for control signalling in automation systems
• Used with optical transmitters operating near 700nm
• Can be used for short-range serial optical links
• Suitable for PCB-mounted detection in equipment panels

What mounting method does it require?

It is designed for through-hole mounting to secure it to a PCB.

How is the optical Fibre attached?

A round connector with a push-in collet secures the Fibre end for alignment.

How many electrical connections are provided?

The device uses a five-pin electrical Interface for power and signal lines.

What output logic level should the receiving circuit expect?

The detector produces a TTL-compatible digital output signal.

Which physical profile may assist low-height installations?

The receiver presents a low-profile height suitable for constrained vertical spaces.