제조사부품번호

Wurth Elektronik Ferrite Ring EMI Suppression Axial Ferrite Bead 9.5 mm, For: Wrapping Cable, Coaxial Cable,

RS 제품 번호:: 144-9783
제조사 부품 번호:: 74270033
제조업체:: Wurth Elektronik

Wurth Elektronik Ferrite Ring EMI Suppression Axial Ferrite Bead 9.5 mm, For: Wrapping Cable, Coaxial Cable,

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 Bag of 500 units)*

₩436,000.00

추가로 2026년 11월 02일 부터 9,000 개 단위 배송
추가로 2026년 11월 23일 부터 1,000 개 단위 배송
추가로 2027년 4월 05일 부터 1,000 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Bag*
500 - 2000	₩872.00	₩436,300.00
2500 +	₩786.00	₩392,700.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 144-9783
제조사 부품 번호:: 74270033
제조업체:: Wurth Elektronik

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Wurth Elektronik
	Sub Type	EMI Suppression Axial Ferrite Bead
	Product Type	Ferrite Ring
	Minimum Frequency	25MHz
	Application	Wrapping Cable, Coaxial Cable, Multiconductor Wire, Wire
	Material	3 W 800 (Ferrite)
	Maximum Frequency	100MHz
	Height	9.5mm
	Inside Diameter	4.75mm
	Outside Diameter	9.5mm
	Series	WE-AFB
	Standards/Approvals	RoHS, REACH

	모두 선택
	브랜드 Wurth Elektronik
	Sub Type EMI Suppression Axial Ferrite Bead
	Product Type Ferrite Ring
	Minimum Frequency 25MHz
	Application Wrapping Cable, Coaxial Cable, Multiconductor Wire, Wire
	Material 3 W 800 (Ferrite)
	Maximum Frequency 100MHz
	Height 9.5mm
	Inside Diameter 4.75mm
	Outside Diameter 9.5mm
	Series WE-AFB
	Standards/Approvals RoHS, REACH

Datasheet

COO (Country of Origin):: TW

Wurth Elektronik WE-AFB Series Ferrite Ring, 9.5mm Outside Diameter, 4.75mm Inside Diameter - 74270033

This ferrite ring is a magnetic suppression component designed to reduce electromagnetic interference on wrapped and coaxial conductors and on wire bundles. It is manufactured from 3W800 ferrite material and intended for insertion onto cables to attenuate common-mode noise within a medium-frequency band while complying with environmental substance regulations.

Features and Benefits:

• 25 to 100MHz frequency range attenuates mid-band interference
• 3W800 ferrite material provides targeted impedance rise
• Axial configuration enables simple in-line installation
• Compatible with multiconductor assemblies for broad mitigation
• RoHS and REACH conformity supports regulated product builds

Applications

• Used with coaxial cable for signal integrity protection
• Suitable for wrapping cable to suppress radiated noise
• Used for multiconductor wire EMI reduction in harnesses
• Ideal for axial placement in wire assembly runs
• Can be used as a ferrite choke on cable bundles

What physical sizes determine fit on a cable?

The component has a 9.5mm outside diameter and a 4.75mm inside diameter which set its fit range for cable jackets.

Which frequency band does it principally affect?

It provides attenuation primarily across the 25MHz to 100MHz band where many common-mode disturbances occur.

What material properties influence its electrical behaviour?

The 3W800 ferrite composition yields impedance characteristics tailored for mid-frequency noise suppression, increasing reactance with frequency.

Can it be applied to both single and multiple conductors?

Yes, the axial ferrite bead design is compatible with single coaxial cores and bundled multiconductor runs for EMI reduction.

What regulatory attributes are present for integration?

It meets RoHS and REACH provisions relevant to restricted substances for many industrial supply chains.