Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead), 111 Ω impedance at 25 MHz, 220 Ω impedance at 100 MHz,
- RS 제품 번호:
- 223-4860
- 제조사 부품 번호:
- BLM15EG221SH1D
- 제조업체:
- Murata
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 tape of 100 units)*
₩15,040.00
재고있음
- 8,600 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | Per Tape* |
|---|---|---|
| 100 - 400 | ₩150.40 | ₩15,058.80 |
| 500 - 900 | ₩148.52 | ₩14,795.60 |
| 1000 - 1900 | ₩144.76 | ₩14,513.60 |
| 2000 - 4900 | ₩142.88 | ₩14,269.20 |
| 5000 + | ₩139.12 | ₩14,006.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 223-4860
- 제조사 부품 번호:
- BLM15EG221SH1D
- 제조업체:
- Murata
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Murata | |
| Product Type | Ferrite Bead | |
| Package Type | 0402 | |
| Impedance at 25 MHz | 111Ω | |
| Impedance at 50 MHz | 163Ω | |
| Packaging | 8mm wide Paper Tape | |
| Impedance at 100 MHz | 220Ω | |
| Impedance at 300 MHz | 273Ω | |
| Impedance at 1 GHz | 270Ω | |
| Sub Type | Chip Ferrite Bead | |
| Mount Type | Surface | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | AEC-Q200 | |
| Height | 0.5mm | |
| Length | 1mm | |
| Depth | 0.5mm | |
| Series | BLM15EG_SH | |
| Application | Automotive Electronics | |
| Automotive Standard | AEC-Q200 | |
| Material | Ferrite | |
| 모두 선택 | ||
|---|---|---|
브랜드 Murata | ||
Product Type Ferrite Bead | ||
Package Type 0402 | ||
Impedance at 25 MHz 111Ω | ||
Impedance at 50 MHz 163Ω | ||
Packaging 8mm wide Paper Tape | ||
Impedance at 100 MHz 220Ω | ||
Impedance at 300 MHz 273Ω | ||
Impedance at 1 GHz 270Ω | ||
Sub Type Chip Ferrite Bead | ||
Mount Type Surface | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals AEC-Q200 | ||
Height 0.5mm | ||
Length 1mm | ||
Depth 0.5mm | ||
Series BLM15EG_SH | ||
Application Automotive Electronics | ||
Automotive Standard AEC-Q200 | ||
Material Ferrite | ||
- COO (Country of Origin):
- JP
The Murata BLM15EG series chip ferrite bead has excellent frequency impedance characteristics. It is suitable for noise suppression in 1GHz or higher frequency. It can be used in high current circuits due to its low DC resistance. It has impedance of 220 ohm.
No Lead production using Ni+Sn plating in termination
Operating temperature range from -55 °C to 125 °C
관련된 링크들
- Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead), 111 Ω impedance at 25 MHz, 220 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.8 mm (Solder) (0603) (Chip Ferrite Bead), 600 Ω impedance at 100 MHz, 700 Ω impedance at 1 GHz
- Murata Ferrite Bead 0.5 mm (Surface) (0603) (Chip Ferrite Bead), 390 Ω impedance at 100 MHz, 520 Ω impedance at 1 GHz
- Murata Ferrite Bead 0.5 mm (Surface) (0402) (Chip Ferrite Bead), 120 Ω impedance at 100 MHz, 145 Ω impedance at 1 GHz
- Murata Ferrite Bead 0.5 mm (Surface) (0603) (Chip Ferrite Bead), 100 Ω impedance at 100 MHz, 140 Ω impedance at 1 GHz
- Murata Ferrite Bead 0.8 mm (Surface) (0603) (Chip Ferrite Bead), 600 Ω impedance at 100 MHz, 700 Ω impedance at 1 GHz
- Murata Ferrite Bead 0.8 mm (Surface) (0603) (Chip Ferrite Bead), 120 Ω impedance at 100 MHz, 145 Ω impedance at 1 GHz
- Murata Ferrite Bead 0.5 mm (Surface) (0603) (Chip Ferrite Bead), 330 Ω impedance at 100 MHz, 450 Ω impedance at 1 GHz