제조사부품번호

Vero Technologies 10-27563 1 DIN 41612 Eurocard PCB FR4 With 2.54 x 2.54 1.02 mm Holes, 2.54 mm Pitch, 160 mm

RS 제품 번호:: 435-434
제조사 부품 번호:: 10-27563
제조업체:: Vero Technologies

Vero Technologies 10-27563 1 DIN 41612 Eurocard PCB FR4 With 2.54 x 2.54 1.02 mm Holes, 2.54 mm Pitch, 160 mm

대량 구매 할인 받기

10개 더 담고 1% 할인 받기

View bulk pricing options

Subtotal (1 unit)*

₩46,140.00

18 개 단위 배송 준비 완료
추가로 2026년 11월 20일 부터 31 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	절감
1 - 9	₩46,140.00	-
10 - 39	₩45,500.00	1%
40 +	₩44,720.00	3%

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 435-434
제조사 부품 번호:: 10-27563
제조업체:: Vero Technologies

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vero Technologies
	Board Material	Epoxy Glass Fabric Laminate
	Product Type	Eurocard PCB
	Number of Sides	1
	Copper Thickness	1.6mm
	Hole Diameter	1.02mm
	Hole Layout	2.54 x 2.54
	Hole Pitch	2.54mm
	Connection	DIN 41612
	FR Material Grade	FR4
	Board Thickness	1.6mm
	Width	100mm
	Standards/Approvals	DIN 41617, DIN 41612
	Length	160mm

	모두 선택
	브랜드 Vero Technologies
	Board Material Epoxy Glass Fabric Laminate
	Product Type Eurocard PCB
	Number of Sides 1
	Copper Thickness 1.6mm
	Hole Diameter 1.02mm
	Hole Layout 2.54 x 2.54
	Hole Pitch 2.54mm
	Connection DIN 41612
	FR Material Grade FR4
	Board Thickness 1.6mm
	Width 100mm
	Standards/Approvals DIN 41617, DIN 41612
	Length 160mm

Datasheet

COO (Country of Origin):: GB

Single-Sided Microboard

Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

They are, therefore, more suited to lower clock speed, non-critical applications.

DIN Type Stripboards

Suitable for use with the KM6-II eurocard sub-rack systems

The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.

The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.

Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

Note