대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩32,336.00
재고있음
- 추가로 2026년 1월 19일 부터 248 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩32,336.00 |
| 5 + | ₩26,620.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 273-6701
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Product Type | ESD Grounding Cord | |
| EN 61340-5-1 Compliant | Yes | |
| Cord Length | 1.8m | |
| Standards/Approvals | EN 61340-5-1 | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Product Type ESD Grounding Cord | ||
EN 61340-5-1 Compliant Yes | ||
Cord Length 1.8m | ||
Standards/Approvals EN 61340-5-1 | ||
제외
RS PRO Coiled Cords
In every ESD (electrostatic discharge) environment grounding is essential for blocking ESD. This coiled cord from our own RS PRO brand will safely direct static electricity to the ground. This will protect workers and equipment in an environment where sensitive electronic equipment is used, manufactured, assembled or repaired.
Features and Benefits
• High visibility - bright colours allow the supervisor to see that worker is wearing a wrist strap
• Eliminates intermittent failures that occur with less durable single and dual wire cords
• Rapid retraction strength polyurethane coil cord which provides high memory and less coil cord dragging on the work surface
• Relaxed retraction - will not interfere with your movements
• Improved snap design - stronger strain relief and snap retention for long life; low profile keeps the cord from being disconnected
• High-quality long-life yellow coil cord
• Integral 1MΩ, 2MΩ or 4MΩ resistor
• Soft polyurethane strain relief
Always remember!
• Test the ground before you use it
• Keep a room clean
• Test the wrist strap - best to test the strap is while it is worn
• Each individual workstation must be individually grounded to the ground bus or to the nearest equipment ground
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Note
Wrist bands and cords must be ordered separately.
Standards
Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance
관련된 링크들
- RS PRO ESD Grounding Cord With 10 mm Socket
- SCS ESD Grounding Cord
- RS PRO ESD Grounding Wrist Strap & Cord Set With 10 mm Socket, 10 mm Stud
- RS PRO ESD Grounding Cord With 10 mm Stud
- Notrax ESD Grounding Cord With 10 mm Socket
- RS PRO ESD Grounding Cord
- SCS ESD Grounding Cord With 10 mm Snap
- SCS ESD Grounding Cord With 10 mm Stud