Figaro TGS822-A00 Organic Vapour Air Quality Sensor for Solvent Detectors for Factories, Semiconductor, Dry Cleaner,

모든 Environmental Sensor ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩50,446.50

Add to Basket
수량 선택 또는 입력
단종되는 중
  • 추가로 2026년 5월 15일 부터 8 개 단위 배송
  • 2026년 6월 19일 부터 최종 30 개 단위 배송

수량
한팩당
1 - 1₩50,446.50
2 - 4₩48,925.50
5 +₩46,839.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
134-6673
제조사 부품 번호:
TGS822-A00
제조업체:
Figaro
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Figaro

Product Type

Air Quality Sensor

Gases Detected

Organic Vapour

Application

Solvent Detectors for Factories, Semiconductor, Dry Cleaner, Breath Alcohol Detector, Gas Leak Detectors & Alarm

Sub Type

Gas Sensor

Minimum Supply Voltage

0.2V

Maximum Supply Voltage

24V

Power Source

AC or DC Power Supply

Minimum Operating Temperature

-20°C

Pin Count

6

Maximum Operating Temperature

50°C

Package Type

Module

Length

16.5mm

Standards/Approvals

No

Series

TGS 822

Automotive Standard

No

TGS821, TGS822, TGS823 & TG826 Gas Sensors


A range of gas sensors from Figaro utilising tin dioxide (SnO2) semiconductor technology. In clean air the devices have low conductivity which increases in the presence of a detectable gas. A simple electrical circuit can be used to convert the change in conductivity to an output signal proportional to gas concentration.

• Type TGS821 has high sensitivity and selectivity to hydrogen gas. The sensor can detect concentrations as low as 50ppm, making it ideal for a variety of industrial applications.

• Types TGS822 & TGS823 have high sensitivity to the vapours of organic solvents and a variety of combustible gases such as carbon monoxide, making them good general purpose sensors; type TGS823 has a ceramic base able to withstand temperatures of up to 200°C.

• Type TGS826 has high sensitivity to ammonia gas and can detect concentrations as low as 30ppm. It is ideally suited to critical safety-related applications such as the detection of ammonia leaks in refrigeration systems and ammonia detection in the agricultural field.

PCB Mounted Gas Sensors


Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.

Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement

관련된 링크들