RS PRO Enclosure Heater, 230V ac, 400W Output, 400W Input 300mm x 133 mm

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Enclosure Heaters 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 unit)*

₩190,320.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 33 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
1 - 24₩190,320.00
25 - 49₩182,700.00
50 - 99₩175,100.00
100 +₩171,260.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
754-5547
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Product Type

Enclosure Heater

Output Power

400W

Input Power

400W

Supply Voltage

230V ac

Depth

133mm

Mount Type

Screw

Connection Type

Screw

Width

300mm

IP Rating

IP20

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

155°C

Standards/Approvals

No

Series

ACH400

Frequency

60Hz

Nominal Current

1.73A

COO (Country of Origin):
GB

RS PRO Anti-Condensation Heaters


A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.

A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.;Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.

A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.

Features and Benefits


  • Vitreous enamelled resistor

  • Sheet Steel case

  • Perforated sheet Steel cover

    • Note: The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom

    Why RS PRO?


    Looking to reduce costs but keep the same quality?

    With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.

    Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.

    Note

    The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.

    관련된 링크들