제조사부품번호

ABB Jokab Smile 11 EAR Tina Series Turn Release Illuminated Emergency Stop Push Button, Surface Mount, 32.2 mm Cutout,

RS 제품 번호:: 176-0056
제조사 부품 번호:: 2TLA030050R0100 Smile 11 EAR Tina
제조업체:: ABB Jokab

ABB Jokab Smile 11 EAR Tina Series Turn Release Illuminated Emergency Stop Push Button, Surface Mount, 32.2 mm Cutout,

Subtotal (1 unit)*

₩239,089.50

추가로 2026년 5월 04일 부터 7 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩239,089.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 176-0056
제조사 부품 번호:: 2TLA030050R0100 Smile 11 EAR Tina
제조업체:: ABB Jokab

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	ABB Jokab
	Mount Type	Surface Mount
	Product Type	Emergency Stop Push Button
	Cutout Diameter	32.2mm
	Push Button Actuation	Turn Release
	Illuminated	Yes
	Series	Smile 11 EAR Tina
	IP Rating	IP65
	Colour	Red
	Terminal Type	M12 Connector
	Contact DC Voltage	24V
	Depth	57mm
	Standards/Approvals	Toxic Substances Control Act - TSCA, REACH Declaration, Conflict Minerals Reporting Template (CMRT)), RoHS, CSA
	Hazardous Area Certification	NO
	Length	57mm
	Width	0.04m

	모두 선택
	브랜드 ABB Jokab
	Mount Type Surface Mount
	Product Type Emergency Stop Push Button
	Cutout Diameter 32.2mm
	Push Button Actuation Turn Release
	Illuminated Yes
	Series Smile 11 EAR Tina
	IP Rating IP65
	Colour Red
	Terminal Type M12 Connector
	Contact DC Voltage 24V
	Depth 57mm
	Standards/Approvals Toxic Substances Control Act - TSCA, REACH Declaration, Conflict Minerals Reporting Template (CMRT)), RoHS, CSA
	Hazardous Area Certification NO
	Length 57mm
	Width 0.04m

Datasheet

ABB Smile 11 EAR Tina Series Emergency Stop Push Button, Red, 24V Contact DC Voltage - 2TLA030050R0100 Smile 11 EAR Tina

This emergency stop push button provides a clear, illuminated means to halt machinery in industrial settings and is engineered for surface-mounted installations. It is intended for DC control circuits and incorporates a turn-release actuation to reset the control once the stop condition has been addressed. The device is suited to environments requiring ingress protection and features an M12 connector for electrical termination.

Features and Benefits:

• 24V DC contact voltage for low-voltage control applications
• IP65 enclosure rating protects against dust and water jets
• Red illuminated actuator for Rapid Visual status indication
• Turn-release mechanism prevents accidental reactivation
• M12 Terminal simplifies secure connectorised wiring
• Complies with CSA and RoHS for documented regulatory coverage

Applications

• Suitable for factory automation emergency shut-down circuits
• Ideal for control panels on production machinery
• Used with conveyor systems requiring visible E-stop indication
• Can be used for safety interfaces on test rigs and benches
• Suitable for retrofitting to surface-mounted operator stations

What type of connector does it use for wiring?

It uses an M12 connector that enables straightforward plug-in termination and quick replacement without direct Terminal screwing.

How is the actuator returned to the operational state after activation?

The actuator resets via a turn-release action which requires a deliberate rotary motion to clear the stop condition.

Is the unit suitable for use in wet production areas?

The IP65 rating means the enclosure is protected against ingress of dust and low-pressure water jets, making it appropriate for many wet-area applications.

Which nominal voltage should the control circuit provide?

The contact arrangement is specified for 24V DC operation and should be used within that DC voltage rating.