Keysight Technologies N3000A Series Electronic Load, 0 to 500 W, 0/150 V, 0 to 60 A

모든 Electronic Loads 열람하기
현재 비가용
죄송합니다. 언제 재입고될지 모릅니다.
RS 제품 번호:
690-9619
Distrelec 제품 번호:
301-50-488
제조사 부품 번호:
N3305A
제조업체:
Keysight Technologies
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Keysight Technologies

Product Type

Electronic Load

Series

N3000A

Load Type

Programmable

Constant Voltage Mode Range

0/150 V

Constant Current Mode Range

0 to 60 A

Constant Resistance Mode Range

0.033 to 5 Ω

Interface Type

RS232, GPIB, Analogue, Front Panel

Constant Wattage Mode Range

0 to 500 W

Operating Modes

Constant Current, Constant Resistance, Constant Power, Constant Voltage

Standards/Approvals

CPI (Standard Commands for Programmable Instruments)

해당 안됨

COO (Country of Origin):
MY

N3300A Series Electronic Loads


This series of DC electronic loads provides fast operation and accurate programming & readback for high-volume DC power supply test systems. The N3300A full-rack width mainframe (3.2kg) accepts user-installable Keysight load modules for easy system configuration and future reconfiguration. It holds user-determined permutations of the N3302A (150W), N3303A & N3307A (250W) and N3304A (300W) modules (one slot each) and N3305A (500W) and N3306A (600W) modules (two slots each). This gives up to 1800W of power, with one GPIB address providing complete control and readback of all the load modules within a single mainframe. The half-rack width N3301A mainframe has two slots.

GPIB and RS-232 control of current, voltage and resistance

GPIB and RS-232 readback of current, voltage and power

Built-in pulse waveform generation with programmable amplitude, frequency, duty cycle and slew rate

Full protection from over-current, over-voltage, over-power, over-temperature and reverse polarity

Electronic calibration

Trigger for external synchronization

Parallel units in constant current mode for higher power

VXI plug&play drivers

Note

For mounting the N3300A two off Rack Mount Kits 713-4270 will be required.

관련된 링크들