Phoenix Contact RIF-0-RSC-24DC/21AU Series Interface Relay, DIN Rail, 24 V dc Coil, SPDT, 9 mA

현재 이용 불가
이 품목의 재입고 여부는 알 수 없으며 제조업체에서 단종되고 있습니다.

대체품

이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.

RS 제품 번호:
175-0518
제조사 부품 번호:
2903372
제조업체:
Phoenix Contact
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Phoenix Contact

Coil Voltage

24 V dc

Product Type

Interface Relay

Contact Configuration

SPDT

Mount Type

DIN Rail

Series

RIF-0-RSC-24DC/21AU

Terminal Type

Screw

Switching Current

10 mA

Minimum Operating Temperature

-40°C

Switching AC Voltage

250 V ac

Switching DC Voltage

250 V dc

Coil Current

9 mA

Contact Material

Silver Alloy

Maximum Operating Temperature

60°C

Standards/Approvals

IEC 60947-5-1

Length

6.2mm

Width

82 mm

Height

84mm

COO (Country of Origin):
CZ

Phoenix Contact Interface Relay, Pre-Assembled, 0.22W Maximum Power Loss - RIF-0-RSC-24DC/21AU - 2903372


Keen to seek out power faults in your control system? Fit this interface relay from Phoenix Contact. It's a plug-in type that isolates its input and output against voltages up to 6kV, cutting the risk of damage from power surges. Gold-plated silver alloy pins efficiently conduct electricity for reliable switching every time. By reacting to signals in between 5 and 8ms, this device is a safe bet when you need speedy system management. Screw terminals make it simple to secure conductors.

As the relay releases its plug-in element with a simple push button ejector, swapping components is simple. Knocks and bumps are no match for the hardwearing plastic housing. Thanks to its snappy DIN rail mounting method, the module clips into a system without the hassle of tools. It comes pre-assembled, so you can skip through preparation time to get straight to switching.

Features & Benefits


• Compact measurements of 6.2 (W) x 84 (H) x 82mm (D) for easy installation in busy cabinets

• EN 60068-2-60 approval indicates effective protection from corrosive gas

• Tested to IEC 60947-5-1 standards for use in control setups

관련된 링크들