onsemi CAT25160VI-GT3, 16 kB Serial EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- RS 제품 번호:
- 186-9796
- 제조사 부품 번호:
- CAT25160VI-GT3
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 25 units)*
₩12,126.00
재고있음
- 3,150 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 25 - 725 | ₩485.04 | ₩12,126.00 |
| 750 - 1475 | ₩473.76 | ₩11,844.00 |
| 1500 + | ₩464.36 | ₩11,618.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 186-9796
- 제조사 부품 번호:
- CAT25160VI-GT3
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Memory Size | 16kB | |
| Product Type | Serial EEPROM | |
| Interface Type | Serial-SPI | |
| Package Type | SOIC | |
| Mount Type | Surface | |
| Pin Count | 8 | |
| Maximum Clock Frequency | 20MHz | |
| Organisation | 2K x 8 bit | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Bits per Word | 8 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Length | 5mm | |
| Width | 6 mm | |
| Data Retention | 100year | |
| Maximum Random Access Time | 40ns | |
| Supply Current | 2mA | |
| Automotive Standard | AEC-Q100 | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Memory Size 16kB | ||
Product Type Serial EEPROM | ||
Interface Type Serial-SPI | ||
Package Type SOIC | ||
Mount Type Surface | ||
Pin Count 8 | ||
Maximum Clock Frequency 20MHz | ||
Organisation 2K x 8 bit | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5.5V | ||
Number of Bits per Word 8 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Length 5mm | ||
Width 6 mm | ||
Data Retention 100year | ||
Maximum Random Access Time 40ns | ||
Supply Current 2mA | ||
Automotive Standard AEC-Q100 | ||
The CAT25160 are a EEPROM Serial 16-Kb SPI devices internally organized as 2048x8 bits. They feature a 32-byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25160 device. These devices feature software and hardware write protection, including partial as well as full array protection.
10 MHz SPI compatible
1.8 V to 5.5 V supply voltage range
SPI modes (0,0 & 1,1)
32-byte page write buffer
Self-timed write cycle
Hardware and software protection
Block write protection - Protect 1/4, 1/2 or all of EEPROM array
Low power CMOS technology
1,000,000 program/erase cycles
100 year data retention
Industrial and Extended temperature range
8 lead PDIP, SOIC, TSSOP and 8-pad TDFN, UDFN packages
Applications
Automotive Systems
Communications Systems
Computer Systems
Consumer Systems
Industrial Systems
관련된 링크들
- onsemi, 16 kB Serial EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- onsemi CAT25640VI-GT3, 64 kB Serial EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- onsemi CAT25320VI-GT3, 32 kB EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- onsemi CAT25256VI-GT3, 256 kB EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- onsemi CAT25128VI-GT3, 128 kB EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- onsemi, 64 kB Serial EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- onsemi, 128 kB EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- onsemi, 256 kB EEPROM, 40 ns 8-Pin SOIC Serial-SPI