Subtotal (1 pack of 10 units)*
₩24,590.40
재고있음
- 10 개 단위 배송 준비 완료
- 추가로 다른 지역에서 9,420 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩2,459.04 | ₩24,590.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 390-2448
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Material | Metal | |
| Maximum Wire CSA | 10mm² | |
| Minimum Diameter | 12mm | |
| Maximum Diameter | 32mm | |
| Diameter Range | 12 → 32mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Material Metal | ||
Maximum Wire CSA 10mm² | ||
Minimum Diameter 12mm | ||
Maximum Diameter 32mm | ||
Diameter Range 12 → 32mm | ||
- COO (Country of Origin):
- GB
RS PRO Earth Clamp Metal 12 mm → 32 mm Diameter
The RS PRO earth metal clamp protects electrical equipment and people working on electrical applications from shocks or power surges by diverting or grounding excess current.
It has a diameter of 12 mm to 32 mm and is made from zinc-plated phosphor bronze. This plating gives it good resistance to corrosion, so the clamp is useful for damp or chemical-laden conditions. It has a stainless steel strap and is supplied with an aluminium label embossed with a safety warning that is bolted onto the clamp. The earth clamp has a maximum wire cross-section area of 10 mm² and meets electrostatic control standards for reduction of electrostatic shock.
The earthing strap and clamp encircle the component you are working on and must be connected to a ground conductor with an earthing wire. It's also commonly used as an antistatic device to prevent damage to equipment.
It has a diameter of 12 mm to 32 mm and is made from zinc-plated phosphor bronze. This plating gives it good resistance to corrosion, so the clamp is useful for damp or chemical-laden conditions. It has a stainless steel strap and is supplied with an aluminium label embossed with a safety warning that is bolted onto the clamp. The earth clamp has a maximum wire cross-section area of 10 mm² and meets electrostatic control standards for reduction of electrostatic shock.
The earthing strap and clamp encircle the component you are working on and must be connected to a ground conductor with an earthing wire. It's also commonly used as an antistatic device to prevent damage to equipment.
Features and Benefits
• Metal earth clamp
• Maximum wire cross-section area of 10 mm²
• Minimum diameter of 12 mm
• Maximum diameter of 32 mm
• Supplied with an aluminium label embossed with "Safety Electrical Connection Do Not Remove"
• Meets ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• RoHS (Restriction of Hazardous Substances) Compliant
• Maximum wire cross-section area of 10 mm²
• Minimum diameter of 12 mm
• Maximum diameter of 32 mm
• Supplied with an aluminium label embossed with "Safety Electrical Connection Do Not Remove"
• Meets ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• RoHS (Restriction of Hazardous Substances) Compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Supplied with
An Aluminium Label Embossed "Safety Electrical Connection Do Not Remove"
관련된 링크들
- RS PRO Earthing Strap Copper 150 x 13mm Diameter
- RS PRO Earthing Strap
- Murrelektronik Limited Earthing Strap Tinned Copper
- RS PRO Earthing Strap Copper 75 x 13mm Diameter
- RS PRO Earthing Strap Copper 457 x 13mm Diameter
- RS PRO Earthing Strap Copper 300 x 13mm Diameter
- SES Sterling Earthing Strap Tinned Bronze 16 → 48mm Diameter, 2.5 → 10mm² Wire Range
- RS PRO Earthing Strap Steel
