Tesa 4688 04688-00043 Cloth Tape, 25 mm x 50mm, White, PE Coated Finish

모든 Duct Tapes 열람하기

Subtotal (1 unit)*

₩28,080.00

Add to Basket
수량 선택 또는 입력
제한된 재고
  • 추가로 2026년 11월 09일 부터 75 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩28,080.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
282-4523
Distrelec 제품 번호:
110-52-041
제조사 부품 번호:
04688-00043-01
제조업체:
Tesa
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Tesa

Product Type

Cloth Tape

Tape Type

Cloth Tape

Colour

White

Width

50mm

Length

25mm

Backing Material

Polyethylene Cloth

Thickness

260μm

Adhesive Material

Rubber

Adhesion Strength

3.4N/cm

Elongation at Break

9

Tensile Strength

52MPa

Finish

PE Coated

Minimum Operating Temperature

0°C

Maximum Operating Temperature

110°C

Standards/Approvals

TLV 9027

Trade Name

4688

Model Number

04688-00043

제외

COO (Country of Origin):
ID

Tesa Cloth Tape, 50mm Width, White - 04688-00043-01


This cloth tape is a PE-coated, flexible adhesive tape designed for industrial maintenance and general-purpose sealing. It combines a polyethylene cloth backing with a rubber-based adhesive to perform across a range of ambient conditions. The product is intended for applications where a reinforced fabric face and a pressure-sensitive sticky layer are needed for short- to medium-term fixing, bundling or surface protection.

Features and Benefits:


• 0.26mm thickness provides low-profile reinforcement and handling
• 3.4N/cm adhesion strength secures materials with controlled peel resistance
• 52MPa tensile strength resists tearing under load
• Heat tolerance up to110°C supports hot-surface tasks
• Operable down to0°C maintains adhesion in cooler environments

Applications


• Suitable for temporary sealing on cable runs
• Ideal for binding materials during fabrication
• Used with pipe wraps for short-term protection
• Can be used for labelling uneven surfaces
• Suitable for surface protection during painting preparation

What backing material gives the tape its flexibility?


A polyethylene cloth backing provides conformability and tear resistance.

How does the adhesive perform when a firm hold is required?


A rubber-based adhesive delivers an adhesion strength measured at3.4N/cm for an effective bond to a variety of substrates.

What mechanical loads can the tape withstand before failure?


The material exhibits a tensile strength of52MPa, indicating resistance to elongation under tension.

What are the operating temperature limits for use?


The tape is suitable for use from a minimum of0°C up to a maximum of110°C.

How much stretch does the tape allow before breaking?


Elongation at break is9%, providing limited stretch for conforming applications.

관련된 링크들