3M 9527 White Double Sided Tape, 6N/cm, 12mm x 50 m

모든 Double Sided Tapes 열람하기

Subtotal (1 unit)*

₩13,020.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 9월 07일 부터 286 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩13,020.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
338-356
제조사 부품 번호:
7000111529
제조업체:
3M
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

3M

Product Type

Double Sided Tape

Tape Type

Adhesive Tape

Width

12mm

Length

50m

Thickness

0.13mm

Colour

White

Trade Name

9527

Adhesion Strength

6N/cm

Standards/Approvals

No

제외

COO (Country of Origin):
CH

3M Double Sided Tape, 12mm Width, 0.13mm Thickness - 7000111529


This double-sided tape is a thin adhesive tape designed for permanent joining and mounting tasks in industrial settings. It provides a discreet white bondline for applications where a low-profile attachment is required, and is supplied on a 50 m roll for continuous use across production or maintenance operations.

Features & Benefits


• High adhesion of 6 N/cm delivers strong bond strength for assemblies
• 0.13mm thickness enables low-profile joining and minimal gap
• 12mm width facilitates narrow bonding areas and precision placement
• White colour offers a neat finish where appearance matters
• Supplied as a 50 m roll reduces reel changes in production runs

**Applications**


• Suitable for securing sensors and small modules in automation systems
• Ideal for attaching components in electronics assembly processes
• Used for fixing trims and panels in electrical enclosures
• Can be used for temporary fixtures during mechanical prototyping

What handling considerations are there for long rolls in production?


Long rolls should be stored on a clean, dry spool to avoid contamination and unwinding

cut lengths using a Sharp blade for clean edges and consistent application.

How does the tape perform when applied to smooth versus textured substrates?


Adhesion is optimised for contact on smooth surfaces where full-surface contact is achievable, textured substrates may reduce effective bond area and lower holding performance.

What surface preparation improves bond reliability?


Remove dust, oils and particulates with a solvent-compatible wipe and ensure the substrate is dry and at room temperature before applying pressure to establish contact.

How should excess material be trimmed after application in tight assemblies?


Use a precision knife or micro-scissors to trim surplus tape, taking care not to lift adjacent bonded areas

work from the edge towards the centre for control.

관련된 링크들