STMicroelectronics LED Driver, 100 W Output, 5.5 mA
- RS 제품 번호:
- 193-9806
- 제조사 부품 번호:
- HVLED007TR
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 reel of 2500 units)*
₩2,932,800.00
일시적 품절
- 2026년 6월 04일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 릴당* |
|---|---|---|
| 2500 - 2500 | ₩1,173.12 | ₩2,933,740.00 |
| 5000 - 22500 | ₩1,150.56 | ₩2,874,990.00 |
| 25000 + | ₩1,126.12 | ₩2,817,180.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 193-9806
- 제조사 부품 번호:
- HVLED007TR
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Product Type | Display Driver | |
| Maximum Output Power | 100W | |
| Input Voltage | 10.5 to 22.5 V | |
| Mount Type | Surface | |
| Sub Type | LED Driver | |
| Terminal Type | Solder | |
| Operating Modes | Transition Mode | |
| LED Voltage | 0/1.5 V | |
| Driver Current | 5.5 mA | |
| Number of Outputs | 5 | |
| Series | HVLED007 | |
| Standards/Approvals | EN 61000-3-2 | |
| Power Dissipation | 0.65W | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Product Type Display Driver | ||
Maximum Output Power 100W | ||
Input Voltage 10.5 to 22.5 V | ||
Mount Type Surface | ||
Sub Type LED Driver | ||
Terminal Type Solder | ||
Operating Modes Transition Mode | ||
LED Voltage 0/1.5 V | ||
Driver Current 5.5 mA | ||
Number of Outputs 5 | ||
Series HVLED007 | ||
Standards/Approvals EN 61000-3-2 | ||
Power Dissipation 0.65W | ||
- COO (Country of Origin):
- MA
The HVLED007 is a current-mode PFC controller specific for isolated high power factor, flyback converters operated in transition mode (aka quasi-resonant operation). Targeting both indoor and outdoor solid-state lighting applications, it provides extended temperature range operation down to -40 °C with guaranteed electrical specification. The main feature of this IC is a special circuit (Input Current Shaper, ICS), that enables High-PF quasi-resonant flyback converters to draw a theoretically sinusoidal input current from the power line, unlike the traditional control. In practice, with little effort it is possible to achieve a total distortion of the input current (THD) lower than 10% at full load and lower than 20% at 30% load over the entire input voltage range.The IC is provided with a control input intended for being driven by the phototransistor of an optocoupler to close a secondary-regulated isolated control loop. However, with the addition of a simple external circuitry it can be used to close a primary-regulated voltage loop as well.
관련된 링크들
- STMicroelectronics LED Driver, 100 W Output, 5.5 mA
- STMicroelectronics EVLHVLED007W35F, 35W LED driver LED Driver Evaluation Board for HVLED007 for Safe operation in
- STMicroelectronics LED Driver, 5.5/40 V 100 mA Tape & Reel
- STMicroelectronics L99LDLH32TR LED Driver, 5.5/40 V 100 mA Tape & Reel
- STMicroelectronics STEVAL-LLL007V1, STEVAL LED Driver for LED1202 for LED Driver
- STMicroelectronics STEVAL-ILL055V1, STEVAL LED Driver Evaluation Board for HVLED815PF for High Power LED
- STMicroelectronics LED1642GWXTTR Gate Driver, 40 mA 24-Pin 5.5 V, TSSOP-24
- STMicroelectronics LED Driver, 19 V Output, 6 to 60 mA Global Dimming, Register, 7-bit PWM local brightness control
