- RS 제품 번호:
- 215-710
- 제조업체:
- RS PRO
- RS 제품 번호:
- 215-710
- 제조업체:
- RS PRO
참조 문서
제정법과 컴플라이언스
해당 안됨
제품 세부 사항
RS PRO Thread Die, M10 x 1 mm Pitch, 1 in OD
This precision-engineered, split form die from RS PRO can be used to reclaim damaged threads, reducing the need to replace a thread when it wears out. The die is made from high-speed steel (HSS) that can cut cleanly through the damaged thread to restore it to its original condition.
This die nut can be used to reclaim threads with a size of M10 and a pitch of 1 mm. It measures one inch (about 25 mm) in diameter.
The die nut meets the requirements of US (ANSI/ESD S20.20:2014) and European (BS EN 61340-5-1:2007) electrostatic control standards, meaning that it won't damage equipment via electrostatic discharge. Die nuts are commonly used to reclaim the threads of pipes as well as threads in hydraulic installations and in individual parts for maintenance.
This die nut can be used to reclaim threads with a size of M10 and a pitch of 1 mm. It measures one inch (about 25 mm) in diameter.
The die nut meets the requirements of US (ANSI/ESD S20.20:2014) and European (BS EN 61340-5-1:2007) electrostatic control standards, meaning that it won't damage equipment via electrostatic discharge. Die nuts are commonly used to reclaim the threads of pipes as well as threads in hydraulic installations and in individual parts for maintenance.
Features and Benefits
• Made of high-speed steel (HSS)
• Outside diameter of 1 in
• Pitch of 1 mm
• Thread size of M10
• Outside diameter of 1 in
• Pitch of 1 mm
• Thread size of M10
사양
속성 | 값 |
---|---|
Thread Size | M10 |
Pitch | 1mm |
Outside Diameter | 1in |
Material | HSS |