Mitutoyo 2046AMetric Dial Indicator, -10 → +10 mm Measurement Range, 0.01 mm Resolution , ±12 μm Accuracy
- RS 제품 번호:
- 397-6629
- 제조사 부품 번호:
- 2046A
- 제조업체:
- Mitutoyo
19 개 홍콩에 재고-결제 확인후 2-3영업일내 국내 도착
31 <재고있음> 5-9영업일내 홍콩 발송
추가완료!
단가 개당
₩83,628.327
수량 | 한팩당 |
1 + | ₩83,628.327 |
- RS 제품 번호:
- 397-6629
- 제조사 부품 번호:
- 2046A
- 제조업체:
- Mitutoyo
참조 문서
제정법과 컴플라이언스
해당 안됨
- COO (Country of Origin):
- JP
제품 세부 사항
Mitutoyo Lever Indicator
The Mitutoyo standard lever indicator has a dial reading of ±0-100 and a maximum resolution of 0.01mm. It is a compact professional measuring instrument that can reach places conventional indicators cannot. It is useful for both alignment and measurement purposes. The indicator has a strong frame that provides excellent rigidity and durability. The clear and concise wide dial face allows excellent visibility. The surface of the crystal is hard-coated for excellent scratch and chemical resistance. It is an instrument that measures comparison ensuring high-quality, high accuracy and reliability.
The dual-reading scale aids measurement in both directions. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can easily be installed and removed without tools.
The dual-reading scale aids measurement in both directions. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can easily be installed and removed without tools.
Features and Benefits
Maximum measurement of 10mm
Accuracy of 13um
Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration
The spindle is made of high strength quench hardened stainless steel which resists arduous use
A carbide contact point is used
A special alloy is used for the sector gears to provide improved wear resistance
Accuracy of 13um
Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration
The spindle is made of high strength quench hardened stainless steel which resists arduous use
A carbide contact point is used
A special alloy is used for the sector gears to provide improved wear resistance
Applications
Automotive
Machining
Fabrication
Manufacturing
Workshops
Machining
Fabrication
Manufacturing
Workshops
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
BS EN 61340-5-1:2007
사양
속성 | 값 |
---|---|
Maximum Measurement | 10mm |
Accuracy | ±12 μm |
Resolution | 0.01 mm |
Measurement Range | 10 mm |
Imperial or Metric | Metric |