Weller 1 XDS Desoldering Nozzle for use with Desoldering iron DSX120/WXDP120/WXDV120

모든 Desoldering Nozzles 열람하기

Subtotal (1 unit)*

₩23,280.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 459 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩23,280.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
764-2910
Distrelec 제품 번호:
182-50-093
제조사 부품 번호:
T0051325399
제조업체:
Weller
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Weller

Product Type

Desoldering Nozzle

Sub Type

Desoldering Nozzle

Nozzle Size

2.5 mm

For Use With

Desoldering iron DSX120/WXDP120/WXDV120

Nozzle Series

XDS

Number of Pieces

1

Length

10.5mm

Standards/Approvals

UPC

COO (Country of Origin):
BA

Weller Desoldering Nozzle, 10.5mm Length, 2.5mm Nozzle Size - T0051325399


This desoldering nozzle is designed to remove solder by directing suction from a compatible desoldering iron, providing a focused pathway for molten solder extraction in routine maintenance and repair tasks. It connects to specific hot-air removal tools and is intended for iterative desoldering operations where a replaceable tip is required.

Features and Benefits:


• 2.5mm aperture enables precise solder extraction and reduced thermal spread
• UPC approval confirms adherence to recognised acceptance standards
• Single-piece supply simplifies inventory and replacement procedures
• Compatible with multiple iron types for cross-equipment flexibility

Applications


• Used with DSX120 series desoldering irons for component removal
• Suitable for WXDP120 tools during board rework operations
• Compatible with WXDV120 units for targeted solder clearance
• Can be used for precision through-hole solder removal tasks

What length does the nozzle have and why does it matter?


It measures 10.5mm which provides sufficient reach into recessed component areas while limiting unnecessary exposure to surrounding pads.

How many nozzles are provided per purchase?


Each unit is supplied as a single nozzle to replace one worn or damaged tip at a time.

Which nozzle diameter should I select for fine-pitch components?


The 2.5mm opening is suitable for narrow joints where concentrated suction and minimal thermal contact are required.

Will this nozzle fit different desoldering irons?


It is designed for use with the specified iron models and will interface mechanically with those designated units.

관련된 링크들