대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩3,004,872.00
재고있음
- 2 개 단위 배송 준비 완료
- 추가로 2026년 6월 04일 부터 52 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩3,004,872.00 |
| 5 - 24 | ₩2,704,377.00 |
| 25 + | ₩2,225,710.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 131-1321
- 제조사 부품 번호:
- 8.16.28 J-Link ULTRA+
- 제조업체:
- SEGGER
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SEGGER | |
| Kit Type | J-Link ULTRA+ Emulator | |
| Core Architecture | ARM | |
| Standards/Approvals | No | |
| Product Type | Programmers & In-Circuit Emulator | |
| Sub Type | Programmer | |
| For Use With | Flash Microcontrollers | |
| 모두 선택 | ||
|---|---|---|
브랜드 SEGGER | ||
Kit Type J-Link ULTRA+ Emulator | ||
Core Architecture ARM | ||
Standards/Approvals No | ||
Product Type Programmers & In-Circuit Emulator | ||
Sub Type Programmer | ||
For Use With Flash Microcontrollers | ||
J-Link ULTRA+ Probe
J-Link ULTRA+ is a JTAG/SWD programming and debug probe supporting a large number of processor cores. It features seamless integration into the IAR Embedded Workbench IDE and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI / RDDI and J-Flash.
Supported Processors
• ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
• Microchip PIC32
• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Features
• Direct download into Flash memory of most microcontrollers supported
• Download speed up to 3MB/sec
• Supports unlimited breakpoints in Flash memory
• Supports breakpoints in external Flash memory of Cortex-M systems
• Supports concurrent access to CPU by multiple applications
• Remote Server included. Allows using J-Link remotely via TCP/IP
• Automatic core recognition
• Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer)
• Supports J-Flash Production Flash programming
• Maximum target interface speed: 50MHz
• Maximum SWO sampling speed: 100MHz
• Wide target voltage range: +1.2V to +3.3V, +5V tolerant
• Embedded Trace Buffer (ETB) support
• Various target adapters and optical isolation adapters available
• RDI / RDDI interface
• Powered via USB connector
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: 300mA with overload protection
• Target interface: JTAG/SWD 20-pin
• PC interface: USB 2.0 HS
• Dimensions: 100 x 53 x 27mm
• Cross-platform support (runs on Windows, Linux, Mac OS X)
• Flash DLL available
• Software Developer Kit (SDK) available
• Free software updates, 1 year of support
Target Adapters & Adapter Cables
• 131-1325 J-Link Target Power Supply Adapter;• 131-1326 J-Link 10-pin Needle Adapter;• 131-1327 J-Link RX100/200/600 MCU Adapter;• 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter;• 131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter;• 131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter;• 131-1331 J-Link Microchip PIC32 MCU Adapter
Link Isolator Boards
• 131-1335 J-Link ARM JTAG Isolator Board;• 131-1336 J-Link ARM SWD Isolator Board;• 131-1337 J-Link USB Isolator Board
Supplied with
USB cable, 20-pin ribbon cable
관련된 링크들
- SEGGER 8.08.28 J-Link PLUS,
- SEGGER 8.12.00 J-Link PRO,
- SEGGER 8.08.00 J-LINK BASE,
- SEGGER 8.19.00 for use with J-Link Debug Probe
- SEGGER 8.20.00 J-Trace PRO Cortex,
- SEGGER 8.18.00 J-Trace PRO for Cortex M,
- SEGGER 8.06.04 J-Link 10-Pin Needle Adapter Adapter for use with J-Link Probes
- SEGGER 8.06.16 J-Link 6-pin Needle Adapter Adapter for use with J-Link