Recom REC15E-Z DC/DC Converter, 12V dc/ 1.25 A, 24V dc Input, 9V Input 15 W, Through Hole, 105 °C Max Temp -40 °C Min

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tube of 8 units)*

₩310,089.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

Tube(s)
Per Tube
한팩당*
1 - 1₩310,089.00₩38,762.10
2 - 3₩303,264.00₩37,908.00
4 +₩296,751.00₩37,092.90

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
180-9217
제조사 부품 번호:
REC15E-2412SZ
제조업체:
Recom
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Recom

Product Type

DC/DC Converter

Output Voltage 1

12V dc

Minimum Input Voltage

9V

Maximum Input Voltage

24V dc

Output Current 1

1.25A

Mount Type

Through Hole

Input Ratio

4:1

Number of Outputs

1

MTBF

1400000h

Ripple and Noise

100mV

Isolation Voltage

1.6kV dc

Number of Pins

6

Package Type

1 x 1 in

Maximum Output Power

15W

Series

REC15E-Z

Width

10mm

Standards/Approvals

cRUus, CAN, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN55032, EN61000-4-8, EN62368-1, IEC62368-1, UL62368-1, CSA C22.2 No. 62368-1-14

Weight

17g

Depth

10mm

Length

25.4mm

Efficiency

88.5%

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

105°C

The REC15E-Z series are 4:1 wide input voltage range 15W power DC/DC converters in a 1”x1” case. Despite their low cost, the converters are fully specified devices with output currents up to 4 Amps, no minimum load, 1.6kVDC isolation, high efficiency and low ripple/noise figures. The inputs are protected against transients of up to 100V and allow the primary supply to start up safely. The single or dual outputs are continuously protected against short circuits and overload and can drive high capacitive loads. The REC15E-Z series will find many uses in cost sensitive applications where board space is at a premium.

4:1 wide input voltage range

Compact size 1“x1“ package

Efficiency up to 90%

Wide operating temperature from

-40°C to +75°C without derating

Continuous short circuit protection