3M SDR 122 26 Way Straight 800 μm Pitch Through Hole D-Sub Connector Female

Use this connector socket from 3M to link digital cameras to the printed circuit boards (PCBs) on computers. It features shrunk delta ribbon (SDR) contact technology with a compact 0.8mm pitch for use in applications where space management is essential. The connector comes with a full metal face, meaning you enjoy seamless transmission free from electromagnetic interference (EMI). It also has corrosion-resistant copper contacts that allow for a reliable connection. You'll find units like this commonly used in equipment that needs high transmission speeds of up to 850MB/s.

• Nylon insulating material for protection from electrical shocks• Withstanding voltage rating of 350Vrms for 1 minute to resist voltage spikes• Ground lock screws for a strong hold on PCBs• Wiper-on-wiper ribbon contacts for secure repetitive mating

• Photographic equipment• Security camera installation

Even though both connectors have the same internal schematics, the SDR socket is smaller in size and delivers a higher transmission speed than MDR.

These 3M 122 Series Shrunk D Ribbon (SDR) Boardmount Shielded Receptacles have a low profile 0.8 mm pitch. The design of these 122 Series Shrunk D Ribbon (SDR) Boardmount Shielded Receptacles includes provision for M2 Jacksocket screws available separately, see below, or factory installed for stock numbers: 770-9209 and 770-9206 .

770-9212 : M2 for 0.8 mm thick Panel

122xx-xx5x-xxxx: Non-removable M2 Screw Jacks installed

The Shrunk Delta Ribbon Connector (SDR) solution uses the same ribbon contact system and polarized steel shell interface as used in MDR connectors but in a compact 0.8 mm pitch package without sacrificing transmission performance. The SDR connectors can be used to directly replace existing MDR Camera Link® applications.