TE Connectivity AMPLIMITE HD-20 25 Way Straight 2.77 mm Pitch Panel D-Sub Connector Female

RS 제품 번호:: 191-8312
제조사 부품 번호:: 5-747913-2
제조업체:: TE Connectivity

TE Connectivity AMPLIMITE HD-20 25 Way Straight 2.77 mm Pitch Panel D-Sub Connector Female

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tray of 50 units)*

₩382,392.00

일시적 품절

2026년 2월 16일 부터 350 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tray*
50 - 50	₩7,647.84	₩382,429.60
100 - 150	₩7,457.96	₩372,860.40
200 +	₩7,343.28	₩367,126.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 191-8312
제조사 부품 번호:: 5-747913-2
제조업체:: TE Connectivity

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	TE Connectivity
	Number of Contacts	25
	Product Type	D-Sub Connector
	Orientation	Straight
	Current	3A
	Mount Type	Panel
	Connector Gender	Female
	Connector Type D	D-Sub
	D-Sub Shell Size	B
	Housing Material	Steel
	Voltage	250 V
	Termination Type	Solder
	Minimum Operating Temperature	-55°C
	Contact Gender	Female
	Maximum Operating Temperature	105°C
	Standards/Approvals	No
	Series	AMPLIMITE HD-20
	Contact Material	Brass
	Contact Plating	Gold over Nickel
	Pitch	2.77mm

	모두 선택
	브랜드 TE Connectivity
	Number of Contacts 25
	Product Type D-Sub Connector
	Orientation Straight
	Current 3A
	Mount Type Panel
	Connector Gender Female
	Connector Type D D-Sub
	D-Sub Shell Size B
	Housing Material Steel
	Voltage 250 V
	Termination Type Solder
	Minimum Operating Temperature -55°C
	Contact Gender Female
	Maximum Operating Temperature 105°C
	Standards/Approvals No
	Series AMPLIMITE HD-20
	Contact Material Brass
	Contact Plating Gold over Nickel
	Pitch 2.77mm

Datasheet

AMPLIMITE D-Sub Cable Connector, HD-20 Series, Solder Cup

A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.

AMPLIMITE HD-20 Solder Cup d-sub cable mount d-sub connectors with tin plated shells and two piece 94V-0 rated black thermoplastic inserts. The shields of these AMPLIMITE HD-20 Solder Cup d-sub cable connectors offer full EMI shielding and ESD insulation and can be post molded or covered with enclosures. The crimped shield terminations enable low impedance and the shield crimp provides strain relief.

These AMPLIMITE HD-20 Solder Cup d-sub cable connectors are pre-loaded with duplex plated solder cup contacts and mate with HDE, HDF, HDP and HD-20 (board mount) series d-sub connectors.

For suitable backshells or cable clamps see stock numbers 680-9301, 719-9747 and 680-9355 typically.

The AMPLIMITE series are designed to be used in communication and data interfaces.

• 65% higher density than HD-20 connectors

• Space saving

• 94V0 black thermoplastic insert

• Tin plated, steel shell

Features and Benefits

• Shell sizes offer wide choice of contact positions - 9, 15, 25, 37 and 50.

• Lower cost, commercial version of the military approved series.

• Tin or zinc plated shells, with or without grounding indents.

• Crimp snap-in contacts allows loading of only the number of contacts being used.

• Available with shielding hardware and shielding enclosure kits.

• Numerous cable clamps and mating hardware options.

• Low cost, high performance, precision formed crimp contacts.

Accessories

• Crimp contacts – 446-787

• Male screw retainers – 450-9208 & 717-4498

• Female screw-locks – 717-4543 & 450-9270

• Locking post assembly – 450-9365

• Spring latch – 450-9321

• Latching block with threaded hole – 450-9371

• Latching block with slot recess – 680-9392

TE Connectivity AMPLIMITE D-Subminiature Connectors

Approvals

UL, cUL, CSA