Knipex Knipex 2 mm With Bevel Side cutter
- RS 제품 번호:
- 815-6381
- Distrelec 제품 번호:
- 302-23-028
- 제조사 부품 번호:
- 77 02 120 H
- 제조업체:
- Knipex
Subtotal (1 unit)*
₩313,960.00
재고있음
- 3 개 단위 배송 준비 완료
- 추가로 2026년 11월 30일 부터 3 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩313,960.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 815-6381
- Distrelec 제품 번호:
- 302-23-028
- 제조사 부품 번호:
- 77 02 120 H
- 제조업체:
- Knipex
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 120mm | |
| Jaw Length | 14mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Diode Wire, Aerospace Industry, Tungsten, Cutting Plier, Nickel, Electronic, Piano | |
| ESD Safe | No | |
| Jaw Material | Carbide Metal | |
| Grip Material | Multi-Component | |
| Handle Material | Bi-Metal | |
| Standards/Approvals | DIN ISO 9654 | |
| Maximum Cutting Capacity | 2mm | |
| Cut Type | With Bevel | |
| 모두 선택 | ||
|---|---|---|
브랜드 Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 120mm | ||
Jaw Length 14mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Diode Wire, Aerospace Industry, Tungsten, Cutting Plier, Nickel, Electronic, Piano | ||
ESD Safe No | ||
Jaw Material Carbide Metal | ||
Grip Material Multi-Component | ||
Handle Material Bi-Metal | ||
Standards/Approvals DIN ISO 9654 | ||
Maximum Cutting Capacity 2mm | ||
Cut Type With Bevel | ||
비준수
- COO (Country of Origin):
- DE
KNIPEX 77 02 120 H Electronics Diagonal Cutter with carbide cutting edges with multi-component handles 120 mm
77 02 120 H Electronics Diagonal Cutter with carbide cutting edges For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries. Always the right cutting tool, even with the hardest material. Precision carbide metal cutting edges soldered into forged blanks. Sturdy, zero-backlash box joint. Hardness of the carbide cutting edges 80 – 83 HRC. Pliers with carbide metal cutting edges have a substantially longer service life than such with conventional cutting edges. Constantly reliable cutting results due to the avoidance of cutter deformations caused by overloading. High cost saving due to longer service life of the pliers. - Cutting capacities medium hard wire (diameter): Ø 1.4mm- Cutting capacities hard wire (diameter): Ø 1.0mm- Cutting capacities piano wire (diameter): Ø 0.6mm- Cutting capacities soft wire (diameter): Ø 2mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 7.5mm- Head width (A): 11mm
Technical attributes
For Extreme Demands On Cutting Pliers Caused By Hard Or Tough Materials, E.G. Piano, Nickel, Tungsten And Diode Wire, Such As Those Used More Frequently In The Electronics And Aerospace Industries
Always The Right Cutting Tool, Even With The Hardest Material
Precision Carbide Metal Cutting Edges Soldered Into Forged Blanks
Sturdy, Zero-Backlash Box Joint
Hardness Of The Carbide Cutting Edges 80 – 83 Hrc
Always The Right Cutting Tool, Even With The Hardest Material
Precision Carbide Metal Cutting Edges Soldered Into Forged Blanks
Sturdy, Zero-Backlash Box Joint
Hardness Of The Carbide Cutting Edges 80 – 83 Hrc
관련된 링크들
- Knipex Knipex ESD Safe 2 mm With Bevel Side cutter
- Knipex Knipex 2 mm With Bevel Side cutter
- Knipex Knipex 1.6 mm Small Bevel Side cutter
- Knipex Knipex 1.4 mm With Bevel Side cutter
- Knipex Knipex 1 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.6 mm Small Bevel Side cutter
- Knipex Knipex ESD Safe 1.4 mm With Bevel Side cutter
- Knipex Knipex 1.3 mm With Bevel Side cutter
